708258
28
Zoom out
Zoom in
Previous page
1/217
Next page
28 | English
last measured value is at the bottom of the display, the penultimate measured value is
above it, and so on.
Area measurement
For surface measurements, repeatedly press button (2) until the indicator for surface
measurement appears on the display (5).
Then measure the width and length one after the other as with a length measurement.
The laser beam remains switched on between the two measurements. The distance to be
measured flashes in the indicator for area measurement .
29.589 m
29.589 m
875.51 m
2
The first measured value is shown at the top of the display.
Once the second measurement has been completed, the area is auto-
matically calculated and displayed. The end result is shown at the
bottom of the display, while the individual measured values are
shown above it.
Volume measurement
For volume measurements, repeatedly press button (2) until the indicator for volume
measurement appears on the display (5).
Then measure the width, length and height one after the other as with a length measure-
ment. The laser beam remains switched on between the three measurements. The dis-
tance to be measured flashes in the indicator for volume measurement .
29.589 m
29.589 m
29.589 m
25905.4 m
3
Once the third measurement has been completed, the volume is
automatically calculated and displayed. The end result is shown at
the bottom of the display, while the individual measured values are
shown above it.
Continuous measurement (see figure C)
In continuous measurement mode, the measuring tool can be moved relative to the tar-
get, during which the measured value will be updated every half a second. You can, for
example, move the required distance away from a wall while reading off the current dis-
tance at all times.
For continuous measurements, repeatedly press the button (2) until the indicator for
continuous measurement appears on the display (5).
1 609 92A 4P0 | (18.01.2019) Bosch Power Tools
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PLR 30 C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PLR 30 C in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info