581187
21
Zoom out
Zoom in
Previous page
1/60
Next page
Mehrkanal-DSP-Verstärker
Es wird empfohlen, den Mehrkanal-DSP-Verstärker entweder über die Amp Link-Anschlüsse
oder die Phoenix-Anschlussklemmen an den DSP-Matrix-Mixer anzuschalten. Der Verstärker
verfügt zudem über kombinierte XLR/TRS-Eingänge, falls er ohne den DSP-Matrix-Mixer
verwendet wird.
Link/Act 100Mbps
Network
Override
Sensor +
+12V DC
Sensor -
Bridge 3+4
Input 3 Sens
Input 4 Sens
Bridge 1+2
Input 1 Sens
Input 2 Sens
Power
Input 1 Input 2 Input 3 Input 4
Input 1 Input 2 Input 3 Input 4
Amp Link Input
Link 1 Link 2
Link 3 Link 4
Output 1
Output 3
Output 4
Output 2
0 4Ω 8Ω 70V 100V
0 4Ω 8Ω 70V 100V
0 4Ω 8Ω 70V 100V
0 4Ω 8Ω 70V 100V
0V DC
Active
1/2 3 4
7 8 9 111012(4x) 13 14
5(4x) 6(4x)
Anzahl Teil Beschreibung
1 Netz ein/aus Netzschalter
2 Netzeingang Buchse für Netzspannungseingang
3 Lautsprecheraus
gänge
4 x Lautsprecherausgänge über Phoenix-Anschlussklemmen:
Verbindungen: 100 V, 70 V, 8 Ohm, 4 Ohm und 0 V.
4 Lüftergitter Entlüftung für Verstärkerkühlung. Nicht blockieren!
5 Kombinierte
XLR/TRS-
Eingänge/Loop
Out
4 x 3-poliger symmetrischer XLR-Leitungspegel-Audioeingang (1 bis 4). Wird
hauptsächlich verwendet, wenn der Verstärker nicht an den DSP-Matrix-Mixer
angeschlossen ist (eigenständiger Verstärker):
Die Eingänge/Ausgänge werden intern parallel mit den dazugehörigen
Phoenix-Eingangsanschlüssen verbunden, damit sie entweder als Eingang
oder durchgeschleifter Ausgang verwendet werden können.
Zifferbelegung für 3-poligen XLR-Anschluss: 1 = Masse, 2 = Signal (+),
3 = Signal (-)
6 Phoenix-
Eingänge/Loop
Out
4 x 3-poliger Phoenix-Anschluss für Audioeingang (1 bis 4):
Die Eingänge/Ausgänge werden intern parallel mit den dazugehörigen
kombinierten XLR-TRS-Eingangs-/Loop Out-Anschlüssen verbunden, damit
sie entweder als Eingang oder Ausgang verwenden werden können.
Konfiguration der Stifte von links nach rechts: 1 = Signal (+), 2 = Signal (-),
3 = Masse
7 Amp Link-
Anschluss
1 x RJ45-Anschluss. Zur Verbindung von 4 aufeinander folgenden
Verstärkerkanälen mit dem DSP-Matrix-Mixer. Prozessor-Ausgangskanäle 1 bis 4
oder 5 bis 8.
Bosch empfiehlt ausschließlich die Verwendung von CAT‑5(e)-STP-Kabeln.
Die empfohlene maximale Kabellänge beträgt 5 m.
6.3
PLENA matrix Verbindungen | de 21
Bosch Security Systems B.V. Operation manual 2013-06 | V1.0 |
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PLENA matrix at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PLENA matrix in the language / languages: German as an attachment in your email.

The manual is 2,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info