110140

Bosch PKS 40 Manual

24
Zoom out
Zoom in
Previous page
1/151
Next page
24 | English
1 609 929 N78 | (7.2.08) Bosch Power Tools
– With the Allen key 3, tighten the clamping
bolt 18 turning in rotation direction o. The
tightening torque is between 6–9 Nm, which
corresponds to hand tight plus
¼ turn.
Adjusting the Riving Knife
(see figure B)
f Before any work on the machine itself, pull
the mains plug.
f Always work with the riving knife, except
when carrying out plunge cuts. The riving
knife prevents jamming of the saw blade
while sawing.
Adjustment is carried out at maximum cutting
depth, see Section “Adjusting the Cutting
Depth”.
Loosen screw 24, adjust the riving knife 12 to
the measure shown in the figure and tighten
screw 24 with a tightening torque between
3.5–5 Nm.
Dust/Chip Extraction
f Before any work on the machine itself, pull
the mains plug.
f Dusts from materials such as lead-containing
coatings, some wood types, minerals and
metal can be harmful to one’s health. Touch-
ing or breathing-in the dusts can cause aller-
gic reactions and/or lead to respiratory infec-
tions of the user or bystanders.
Certain dusts, such as oak or beech dust, are
considered as carcinogenic, especially in
connection with wood-treatment additives
(chromate, wood preservative). Materials
containing asbestos may only be worked by
specialists.
– Use dust extraction whenever possible.
– Provide for good ventilation of the work-
ing place.
– It is recommended to wear a P2 filter-
class respirator.
Observe the relevant regulations in your
country for the materials to be worked.
External Dust Extraction
Mount the vacuum hose 29 (accessory) on to
the saw dust ejector 17. Connect the vacuum
hose 29 to a vacuum cleaner (accessory). An
overview for connecting to various vacuum
cleaners can be found at the end of this manual.
The machine can be plugged directly into the re-
ceptacle of a Bosch all-purpose vacuum cleaner
with remote starting control. The vacuum clean-
er starts automatically when the machine is
switched on.
The vacuum cleaner must be suitable for the ma-
terial being worked.
When vacuuming dry dust that is especially det-
rimental to health or carcinogenic, use a special
vacuum cleaner.
Integrated Dust Extraction with Dust Bag
For smaller jobs, a dust bag (accessory) can be
mounted. Insert the dust bag sleeve firmly into
the saw dust ejector 17. Empty the dust bag at
regular intervals to maintain optimum dust col-
lection.
Operation
Operating Modes
f Before any work on the machine itself, pull
the mains plug.
Adjusting the Cutting Depth (see figure C)
f Adjust the cutting depth to the thickness of
the workpiece. Less than a full tooth of the
blade teeth should be visible below the work-
piece.
Loosen wing bolt 14. For a smaller cutting
depth, pull the saw away from the base plate 13;
for a larger cutting depth, push the saw toward
the base plate 13. Adjust the desired cutting
depth at the cutting-depth scale. Tighten wing
bolt 14 again.
Adjusting the Cutting Angle
Loosen wing bolt 6. Tilt the saw sidewards. Ad-
just the desired setting at the scale 5. Tighten
wing bolt 6 again.
OBJ_BUCH-179-003.book Page 24 Thursday, February 7, 2008 9:51 AM
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PKS 40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PKS 40 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch PKS 40

Bosch PKS 40 User Manual - English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info