544059
7
Zoom out
Zoom in
Previous page
1/34
Next page
English | 7
Bosch Power Tools 1 609 929 460 | (26.3.12)
Product Description and Specifica-
tions
Intended Use
The glue gun is intended for the quick gluing of clean, dry and
grease-free materials with hot-melt adhesives.
Use the glue gun only when you fully understand and can per-
form all functions without limitation, or have received appro-
priate instructions.
Product Features
The numbering of the product features refers to the illustra-
tion of the glue gun on the graphics page.
1 Nozzle
2 Heat protection cover
3 Glue stick
4 Feed trigger
5 Support stand
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
Technical Data
Assembly
Screw a nozzle 1 onto the glue gun. Insert the support
stand 5 into the openings on both sides of the glue gun.
Operation
Starting Operation
f Observe the mains voltage! The voltage of the power
source must correspond with the data on the type plate of
the machine. Glue guns marked with 230 V can also be op-
erated with 220 V.
Switching On and Off (see figure A)
–To start the operation of the glue gun, insert the mains
plug into the socket outlet.
Allow the glue gun to heat up for approx. 7 minutes before be-
ginning to work. For this, position the glue gun on the support
stand 5 as shown in the figure.
–To switch off the glue gun, pull the mains plug out of the
socket outlet.
When not using the power tool, pull the mains plug in order to
save energy.
Working Advice
f For longer work breaks, pull the mains plug.
f Do not allow the hot glue or the nozzle tip to come into
contact with persons or animals. Glue and nozzle tip
reach a temperature of approx. 200 ° C; danger of burning.
If hot glue comes into contact with the skin, hold the affect-
ed area immediately under a stream of cold water for sev-
eral minutes. Do not try to remove the glue from the skin.
As the result of heat storage, the glue gun can also be used af-
ter it has heated up for a certain time after switching off. When
the glue that emerges starts to become thick, plug the mains
plug into the socket outlet again.
Preparations for Gluing
The surfaces to be glued must be clean, dry and free of
grease. Roughen smooth surfaces before gluing.
f Do not use inflammable solvents for cleaning the sur-
faces to be glued. Solvent remainders can ignite from the
hot glue, or hazardous vapours can develop.
The ambient temperature and the workpieces to be glued may
not be colder than +5 °C and warmer than +50 °C.
Warm rapidly cooling materials (e.g., steel) for better adhe-
sion using a hot air gun or similar.
Gluing (see figure B)
Allow the glue gun to heat up. Insert the appropriate glue
stick 3 for the material being glued via the opening at the
rear. Press the feed trigger 4 applying moderate pressure.
Apply the glue in the form of points. For gluing flexible ma-
terials (e.g., textiles), apply the glue in a zig-zag line.
After applying the glue, immediately press the surfaces to
be glued together for approx. 30 s. The glued spot can be
subjected to load after a cool-down period of approx.
5 minutes.
Rest the gun on the support stand 5 between individual
gluing runs.
Remove glue residue after cooling with a sharp object. If re-
quired, glued spots can be separated again by applying heat.
Glued spots can be painted.
Changing the Nozzle
–The nozzle 1 can only be changed when in warm condition.
For this, heat up the glue gun for approx. 2 minutes.
f When changing the nozzle, wear protective gloves.
Grasp the hot nozzle only by the heat protection cover
2. Danger of burning when touching the hot nozzle tip.
Hand-tighten the new nozzle 1.
Glue Gun PKP 18 E
Article number
0 603 264 5..
Rated power input
–for heating up
for maintaining heat
W
W
200
16
Heating time
min 7
Gluing temperature
°C 200
Gluing capacity
g/min 20
Glue stick diameter
mm 11
Glue stick length
mm 45200
Weight according to
EPTA-Procedure 01/2003 kg 0.35
Protection class
/II
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
OBJ_BUCH-868-002.book Page 7 Monday, March 26, 2012 8:57 AM
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PKP 18 E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PKP 18 E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info