532996
12
Zoom out
Zoom in
Previous page
1/16
Next page
12
Changing or cancelling the time
Select the hotplate and press the
0 symbol twice.
The __ and
r displays appear
Change the cooking time using symbols 1 to 9 or press 0 to
cancel the time.
Automatically switch off a hotplate with the deep-frying
function
When cooking using the deep-frying function, the programmed
cooking time begins to count down once the selected hotplate
reaches the desired temperature.
Notes
If a cooking time has been programmed, the display always
shows the time of this function. To check the cooking time
remaining in a hotplate, select a hotplate and press the
0
symbol twice.
If a time has been programmed for several hotplates, the
time of the selected hotplate is always shown.
Any cooking time can be programmed for up to 99 minutes.
Automatic timer
With this function you may select a cooking time for all
hotplates. Once a hotplate is switched on, the selected time will
begin to count down. The hotplate will automatically switch off
when the cooking time has elapsed.
Instructions on activating the timer are found in the chapter
entitled "Basic settings".
Note: The cooking time can be changed or cancelled for any
hotplate:
Press the
0 symbol several times until the $ indicator of the
required hotplate lights up. Adjust the cooking time with
symbols 1 to 9 or deactivate with the symbol 0.
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
1.Press the 0 symbol. The indicator U lights up. ‹‹ lights up
in the time program function display.
2.Set the required time using symbols 1 to 9.
The time starts again after a few seconds.
Once the time has elapsed
Once the time has elapsed, a beep will sound.
‹‹ and Uare
displayed in the time program function display. After pressing
the
0 symbol, the indications turn off.
Changing or cancelling the time
Press the
0 symbol, the U indicator lights up.
Change the time using the 1 to 9 symbols or press 0 to cancel.
Cleaning lock function
Cleaning the control panel while the hob is on may change the
settings.
In order to avoid this, the hob has a cleaning lock function.
Press the
>D symbol. A signal sounds. The control panel is
locked for 35 seconds. The surface of the control panel can
now be cleaned without risk of changing the settings.
Note: The lock does not affect the main switch. The hob may
be switched off when desired.
Automatic time limitation
If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. The
”‰ symbol and the residual
heat indicator
œ/ flash alternatively in the display.
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PIM875N24E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PIM875N24E in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch PIM875N24E

Bosch PIM875N24E User Manual - German, Dutch - 64 pages

Bosch PIM875N24E User Manual - Danish - 56 pages

Bosch PIM875N24E User Manual - French, Italian - 64 pages

Bosch PIM875N24E User Manual - Portuguese - 36 pages

Bosch PIM875N24E User Manual - Swedish - 56 pages

Bosch PIM875N24E User Manual - Spanish - 36 pages

Bosch PIM875N24E User Manual - Norwegian, Finnish - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info