532997
12
Zoom out
Zoom in
Previous page
1/20
Next page
12
Changing or cancelling the time
Select the hotplate and then press the
0 symbol.
Change the cooking time using the programming zone or set
to
‹‹ in order to cancel the time.
Automatically switch off a hotplate with the deep-frying
function
When cooking using the deep-frying function, the programmed
cooking time begins to count down once the selected zone
reaches the desired temperature.
Once the time has elapsed
The hotplate switches off. A warning signal sounds. The time
program function lights up
‹‹ for 10 seconds in the display.
When the
0 symbol is pressed, the indications turn off and the
beeping stops.
Notes
To program a cooking time of less than 10 minutes, always
press 0 before selecting the desired value.
If cooking times have been programmed for various zones,
the time program function always displays the time of the
selected hotplate.
Cooking times can be programmed for up to 99 minutes.
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
1.Press the 0 symbol until the U indicator lights up. ‹‹ lights
up in the time program function display.
2.Adjust the desired time in the programming zone.
The time starts to count down again after a few seconds.
Changing or cancelling the time
Press the
0 symbol and the U indicator lights up.
Change the cooking time in the programming zone or press 0
to cancel the time.
Once the time has elapsed
Once the time has elapsed, a beep will sound.
‹‹ and Uare
displayed in the time program function display. After pressing
the
0 symbol, the indications turn off.
Cleaning lock function
Cleaning the control panel while the hob is on may change the
settings.
In order to avoid this, the hob has a cleaning lock function.
Press the
>D symbol. A signal sounds. The control panel is
locked for 35 seconds. The surface of the control panel can
now be cleaned without risk of changing the settings.
Note: The lock does not affect the main switch. The hob may
be switched off when desired.
Automatic time limitation
If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. The
, symbol and the residual
heat indicator
œ/ flash alternately in the display.
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
Displaying energy consumption
This function displays total energy consumption for the time the
hob has been switched on.
After switching off the hob, the consumption in kWh is
displayed for 10 seconds.
An example is shown in the image with a consumption
of
.‹‰ kWh.
The Basic Settings chapter provides information on activating
this function.
NZK
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PIM845F27E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PIM845F27E in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch PIM845F27E

Bosch PIM845F27E Quick start guide - German - 2 pages

Bosch PIM845F27E User Manual - German - 68 pages

Bosch PIM845F27E Quick start guide - Dutch - 2 pages

Bosch PIM845F27E User Manual - Dutch - 68 pages

Bosch PIM845F27E User Manual - Danish - 64 pages

Bosch PIM845F27E Quick start guide - French - 2 pages

Bosch PIM845F27E User Manual - French - 68 pages

Bosch PIM845F27E Quick start guide - Italian - 2 pages

Bosch PIM845F27E User Manual - Italian - 68 pages

Bosch PIM845F27E User Manual - Portuguese - 36 pages

Bosch PIM845F27E User Manual - Swedish - 64 pages

Bosch PIM845F27E User Manual - Spanish - 36 pages

Bosch PIM845F27E User Manual - Norwegian, Finnish - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info