591118
9
Zoom out
Zoom in
Previous page
1/16
Next page
9
Powerboost function
The Powerboost function can be used to heat large amounts of
water more quickly than the power level
Š.
Restrictions when using
This function is available on all hotplates, provided that no other
hotplate in the same group is operating, (see diagram).
Otherwise, the
and Š symbols will flash on the display of the
selected hotplate; then the power level
Š is automatically set.
How to activate
1. Select a hotplate.
2. Press the boost G symbol.
The
indicator lights up.
The Powerboost function will have been activated.
How to deactivate
1. Select a hotplate.
2. Press the boost G symbol.
The
indicator will no longer be displayed and the hotplate
will return to the power level
Š.
The Powerboost function will have been deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Time programming function
This function may be used in two different ways:
to automatically switch off a hotplate.
as a timer.
Turning off a hotplate automatically
The zone turns off automatically once the selected time has
elapsed.
How to program
The hob must be switched on:
1. Select the desired hotplate and power level.
2. Press the 0 symbol. The x indicator on the hotplate lights
up.
‹‹ lights up in the time program function display.
3. Within the next 10 seconds, select the desired cooking time
in the programming zone.
The cooking time starts to count down.
Note: The same cooking time can be automatically
programmed for the all the hotplates. The programmed time
passes independently for each of the hotplates.
The Basic settings chapter provides information on
automatically programming the cooking time.
Changing or cancelling the time
Select the hotplate and then press the
0 symbol.
Change the cooking time using the programming zone or set
to
‹‹ in order to cancel the time.
Once the time has elapsed
The hotplate switches off. A warning signal sounds. The time
program function lights up
‹‹ for 10 seconds in the display.
When the
0 symbol is pressed, the indications turn off and the
beeping stops.
Notes
To program a cooking time of less than 10 minutes, always
press 0 before selecting the desired value.
If cooking times have been programmed for various zones,
the time program function always displays the time of the
selected hotplate.
Cooking times can be programmed for up to 99 minutes.
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
1. Press the 0 symbol until the U indicator lights up. ‹‹ lights
up in the time program function display.
2. Adjust the desired time in the programming zone.
The time starts to count down again after a few seconds.
Changing or cancelling the time
Press the
0 symbol and the U indicator lights up.
Change the cooking time in the programming zone or press 0
to cancel the time.
Once the time has elapsed
Once the time has elapsed, a beep will sound.
‹‹ and Uare
displayed in the time program function display. After pressing
the
0 symbol, the indications turn off.
*URXS
*URXS
 
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PIM845F17E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PIM845F17E in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch PIM845F17E

Bosch PIM845F17E User Manual - German, Dutch, French, Italian - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info