746115
7
Zoom out
Zoom in
Previous page
1/16
Next page
7
Control surfaces
Pressing a symbol activates its corresponding function.
Notes
The settings will not change if several symbols are pressed at
the same time. This enables the programming zone to be
cleaned when food is spilt.
Always keep the control surfaces dry. Moisture can affect
proper functioning.
The hotplates
Residual heat indicator
The hob has a residual heat indicator on each hotplate,
which lights up when they are hot. Avoid touching them when
this indicator is lit.
The
light will remain on while the hotplate is hot, even after
the hob has been turned off.
If the pan is removed before the hotplate is switched off, the
will appear and alternate with the selected power level.
Programming the hob
This section will show you how to program the hotplates. The
table contains power levels and cooking times for several
dishes.
Switching the hotplate on and off
The range is turned on and off using the main switch.
To switch on: press the
% symbol. The indicator next to the
main switch and the
indicators light up. The range is ready
for use.
To switch off: press the
% symbol until the indicators go out. All
hotplates are turned off. The residual heat indicator will remain
lit until the hotplates have cooled down sufficiently.
Note: The range switches off automatically when all the
hotplates have been turned off for more than 20 seconds.
Set the hotplate
Select the required power level with the + and - symbols.
Power level 1 = minimum power.
Power level 9 = maximum power.
Each power level has an intermediate setting. This is marked
with a dot.
Setting the power level
The range should be switched on.
1. Press the § symbol several times until the indicator of the
required hotplate lights up.
2. Within the next 5 seconds, press the + or - symbol.The basic
setting appears:
+ symbol, power level 1.
- symbol, power level 9.
3. To change the power level: select the hotplate and press the
+ or - symbol until the required power level appears.
To switch off the hotplate
Select the hotplate and then press the + or - symbol until
symbol appears.
The hotplate turns off and the residual heat indicator appears.
Note: If no pan has been placed on the induction hotplate, the
selected power level flashes. After a certain time, the hotplate
switches off.
Hotplate Turning on and off
$
Single hotplate Always use cookware of a suitable size.
æ
Broiler This zone is switched on automatically when using cookware with a base the
same size as the outer zone.
Use only cookware suitable for induction cooking; see the section on suitable cookware.
 
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PIE615R14E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PIE615R14E in the language / languages: English as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch PIE615R14E

Bosch PIE615R14E User Manual - German, Dutch, French, Italian - 111 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info