630274
13
Zoom out
Zoom in
Previous page
1/24
Next page
Time-setting options en
13
OTime-setting options
Time-setting options
Your hob has three timer functions:
Programming the cooking time
Kitchen timer
Stopwatch function
Programming the cooking time
The hotplate automatically switches off after the time
that is set has elapsed.
Setting procedure:
1. Select the hotplate and the required heat setting.
2. Touch the 0 symbol twice. The y indicator for the
hotplate lights up. ‹‹ lights up on the timer display.
3. Within the next 10 seconds, set the required cooking
time in the settings range.
After a few seconds, the time begins to elapse.
Note: The same cooking time can be set automatically
for all hotplates. The set time for each of the hotplates
counts down independently.
You can find information on automatically programming
the cooking time in section ~ "Basic settings"
Changing or deleting the time
Select the hotplate and then touch the 0 symbol twice.
Change the cooking time in the control panel or set ‹‹
to delete the programmed cooking time.
When the time has elapsed
The hotplate switches off. An audible signal sounds. In
the timer display, the ‹‹ indicators and the y symbol
beside the heat setting flash for 10 seconds.
When the 0 symbol is touched, the displays go out
and the audible signal ceases.
Notes
To set a cooking time of under 10 minutes, always
touch 0 before you select the required value.
If a cooking time was programmed for several
hotplates, the time information for the selected
hotplate is shown in the timer display.
Select the relevant hotplate to call up the remaining
cooking time.
You can set a cooking time of up to ŠŠ minutes.
The kitchen timer
You can use the kitchen timer to set a time of up to 99
minutes.
This functions independently from the hotplates and
from other settings. This function does not automatically
switch off a hotplate.
Setting procedure
1. Touch the 0 symbol repeatedly until the t indicator
lights up. ‹‹ lights up in the timer display.
2. Set the required time in the control panel.
After a few seconds, the time begins to elapse.
Changing or deleting the time
Touch the 0 symbol repeatedly until the t indicator
lights up.
Change the cooking time in the control panel or set ‹‹
in order to delete the programmed cooking time.
When the time has elapsed
An audible signal sounds. ‹‹ and the t indicator flash
in the timer display. The displays go out after 10
seconds.
When the 0 symbol is touched, the displays go out
and the audible signal ceases.
Stopwatch function
The stopwatch function displays the time that has
elapsed since activation.
This functions independently from the hotplates and
from other settings. This function does not automatically
switch off a hotplate.
Activating
Touch the 0 symbol. The x indicator lights up.‹‹
lights up on the timer display.
Then touch any symbol on the control panel.
The time counts down.
Deactivating
Touch the 0 symbol. The x indicator lights up.
Slide your finger over the control panel. ‹‹ appear in
the timer display and then go out.
The function is deactivated.
 
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PIB375FB1E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PIB375FB1E in the language / languages: English as an attachment in your email.

The manual is 2,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch PIB375FB1E

Bosch PIB375FB1E User Manual - German - 24 pages

Bosch PIB375FB1E User Manual - Dutch - 48 pages

Bosch PIB375FB1E User Manual - French - 28 pages

Bosch PIB375FB1E User Manual - Italian - 48 pages

Bosch PIB375FB1E User Manual - Portuguese, Spanish - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info