Manual Bosch PFS 3000-2 (page 18 of 274) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

544011

Zoom out

Zoom in

1/274

18 | English

2 609 007 771 | (28.2.14) Bosch Power Tools

 Disconnect the plug from the power source and/or the

battery pack from the power tool before making any

adjustments, changing accessories, or storing power

tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

 Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool or

these instructions to operate the power tool. Power

tools are dangerous in the hands of untrained users.

 Maintain power tools. Check for misalignment or bind-

ing of moving parts, breakage of parts and any other

condition that may affect the power tool’s operation. If

damaged, have the power tool repaired before use.

Many accidents are caused by poorly maintained power

tools.

 Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to bind

and are easier to control.

 Use the power tool, accessories and tool bits etc. in ac-

cordance with these instructions, taking into account

the working conditions and the work to be performed.

Use of the power tool for operations different from those

intended could result in a hazardous situation.

Service

 Have your power tool serviced by a qualified repair per-

son using only identical replacement parts. This will en-

sure that the safety of the power tool is maintained.

Safety Warnings for Fine-spray Systems

 Keep area clean, well lit and free of paint or solvent

containers, rags, and other flammable materials.

Spontaneous combustion may occur. Fire extinguisher

equipment shall be present and working at all times.

 Provide for good ventilation in the spraying area and

for sufficient fresh air in the complete room. Evaporat-

ing inflammable solvents create an explosive environment.

 Do not spray and clean with materials that have a flash

point of less than 55 °C. Use materials based on water,

non-volatile hydrocarbons or similar materials. Volatile

evaporating solvents create an explosive environment.

 Do not spray in the vicinity of ignition sources, such as

static electricity sparks, open flames, pilot lights, hot

objects, engines/motors, cigarettes and sparks from

plugging in or unplugging power cords or operating

switches. Such spark sources can ignite the spraying vi-

cinity/environment.

 Do not spray any liquid of unknown hazard potential.

Unknown materials can create hazardous conditions.

 Wear additional protective equipment such as appro-

priate protective gloves and protective masks or respi-

rators when spraying or handling chemicals. Wearing

protective equipment for the appropriate conditions re-

duces the exposure to hazardous substances.

 Be aware of possible hazards from the spray material.

Observe the information on drums/tanks/tins as well

as manufacturer information of the spray material, in-

cluding the request to wear personal protective equip-

ment. The manufacturer's instructions are to be observed

in order to reduce the risk of fire as well as injuries caused

through toxins, carcinogens, etc.

 Keep the plug of the mains cord and the trigger switch

of the spray gun clear of paint and other fluids. Never

hold the cord by its connectors to support it. Failure to

follow the instruction can lead to electric shock.

 Supervise children. This will ensure that children do not

play with the fine-spray system.

Products sold in GB only: Your product is fitted with a

BS 1363/A approved electric plug with internal fuse (ASTA

approved to BS 1362).

If the plug is not suitable for your socket outlets, it should be

cut off and an appropriate plug fitted in its place by an author-

ised customer service agent. The replacement plug should

have the same fuse rating as the original plug.

The severed plug must be disposed of to avoid a possible

shock hazard and should never be inserted into a mains sock-

et elsewhere.

Products sold in AUS and NZ only: Use a residual current de-

vice (RCD) with a rated residual current of 30 mA or less.

OBJ_BUCH-2024-002.book Page 18 Friday, February 28, 2014 9:28 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PFS 3000-2 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 52,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PFS 3000-2 Manual

Product: