382842
10
Zoom out
Zoom in
Previous page
1/68
Next page
12
Working safely with this machine is
possible only when the operating
and safety information are read
completely and the instructions
contained therein are strictly
followed.
In addition, the general safety
instructions in the enclosed
booklet must be followed.
Before using for the first time, ask
for a practical demonstration.
If the cable is damaged or cut through
while working, do not touch the cable
but immediately pull the mains plug.
Never use the machine with a
damaged cable.
Wear safety glasses.
Wear ear protection to prevent damage
to your hearing.
During pauses in the work, when not in use or
during work on the machine itself (e.g., changing of
the working tools, repairs, cleaning, adjustment),
pull the mains plug.
Each time before starting work, check the machine
and attachment tools (e.g. saw blade guide) for
proper functioning.
Use only sharp, flawless tools. Replace
immediately cracked, bent or dull tools.
Always direct the cable to the rear away from the
machine.
When working with the machine, always hold it
firmly with both hands and provide for a secure
stance.
When working, never place the hand or fingers in
the area near the saw blade.
Do not exceed the allowable material thickness.
The cutting path must be free of obstacles both
above and below.
Do not saw into nails, screws, etc.
Do not work with materials containing asbestos.
The machine must not be used in conjunction with
commercially available mitre boxes (see Intended
Use).
Clamp the workpiece when it does not remain
stationary from its own weight.
Apply the machine to the workpiece only when
switched on.
If the saw blade jams, switch off the machine
immediately.
Switch off the machine after each cut!
Always switch off the machine and allow to come
to a stop before putting down.
Do not brake the saw blade to a stop by applying
side pressure after switching off.
Persons under 16 years of age are not permitted to
operate this machine.
Bosch can assure flawless functioning of the
machine only when original accessories are used.
Before any work on the machine itself, pull the
mains plug.
When changing the insertion tools, wear
protective gloves! Insertion tools
become warm when used for longer
periods.
Inserting and Changing the Saw Blade
The machine is equipped with a Bosch-
SDS (Special Direct System) clamping
device. This makes possible simple
and quick changing of saw blades
without additional tools.
For Your Safety
Before Use
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch pfs 280 e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch pfs 280 e in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info