78693
19
Zoom out
Zoom in
Previous page
1/123
Next page
English | 19
Bosch Power Tools 1 609 929 S55 | (23.3.09)
Replacing the Sanding Plate
Note: Replace a damaged sanding plate 7 imme-
diately.
Pull off the sanding sheet or polishing tool.
Completely unscrew the screw 5 and take off
the sanding plate 7. Attach the new sanding
plate 7 and tighten the screw again.
Note: When attaching the sanding plate, pay
attention that the toothing of the drive element
engage into the openings of the sanding plate.
Note: A damaged sanding-plate base may be
changed only by an authorised after-sales serv-
ice agent for Bosch power tools.
Dust/Chip Extraction
f Dusts from materials such as lead-containing
coatings, some wood types, minerals and
metal can be harmful to one’s health. Touch-
ing or breathing-in the dusts can cause aller-
gic reactions and/or lead to respiratory infec-
tions of the user or bystanders.
Certain dusts, such as oak or beech dust, are
considered as carcinogenic, especially in
connection with wood-treatment additives
(chromate, wood preservative). Materials
containing asbestos may only be worked by
specialists.
Use dust extraction whenever possible.
Provide for good ventilation of the work-
ing place.
It is recommended to wear a P2 filter-
class respirator.
Observe the relevant regulations in your
country for the materials to be worked.
Integrated Dust Extraction with Dust Box
(see Fig. A1 A4)
Before assembling the dust box 4, pull out the
plastic slider 12. Place the dust box 4 onto the
extraction outlet 13 and allow it to engage.
Make sure that the plastic slider 12 engages in
the holder 11.
To empty the dust box 4, press the latching le-
vers 14 on the side of the dust box. Pull off the
dust box.
Before opening the dust box 4, it is recommend-
ed to loosen the dust from the filter element by
gently striking it against a firm support (as shown
in the figure).
Grasp the dust box 4 by the recessed grip, fold
the filter element 15 upward and empty the dust
box. Clean the thin plates of the filter element
15 with a soft brush.
Note: To ensure optimum dust extraction, emp-
ty the dust box 4 in good time and clean the fil-
ter element 15 at regular intervals.
When working vertical surfaces, hold the power
tool in such a manner that the dust box 4 faces
downward.
External Dust Extraction (see figure B)
Slide the extraction adapter 16 onto the outlet
piece 13. Ensure that the latching levers of the
extraction adapter engage. The extraction
adapter 16 accepts a vacuum hose with a diam-
eter of 19 mm.
The vacuum cleaner must be suitable for the ma-
terial being worked.
An overview for connecting to different vacuum
cleaners can be found at the end of these oper-
ating instructions.
When vacuuming dry dust that is especially det-
rimental to health or carcinogenic, use a special
vacuum cleaner.
When working vertical surfaces, hold the power
tool in such a manner that the vacuum hose fac-
es downward.
For removal of the extraction adapter 16, press
the latching levers together at the rear and pull
the extraction adapter off.
Auxiliary Handle
The auxiliary handle 8 enables convenient han-
dling and optimal distribution of power, espe-
cially at high removal rates.
Loosen the wing bolt 9 and pivot the auxiliary
handle to the requested position. Make sure
that it engages in the casing and tighten the
wing bolt 9 again.
OBJ_BUCH-969-001.book Page 19 Monday, March 23, 2009 4:07 PM
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PEX 420 AE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PEX 420 AE in the language / languages: Turkish as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch PEX 420 AE

Bosch PEX 420 AE User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish - 123 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info