Manual Bosch Performance Line Drive Unit 25 km-h (page 9 of 52) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

657516

Zoom out

Zoom in

1/52

English–3

Bosch eBike Systems 0 275 007 PDC | (13.4.16)

Setting the Assistance Level

On the on-board computer you can set how much the eBike

drive assists you while pedalling. The assistance level can be

changed at any time, even while cycling.

Note: For individual versions, it is possible that the assistance

level is pre-set and cannot be changed. It is also possible that

less assistance levels are available for selection than listed

here.

The following assistance levels (max.) are available:

– “OFF”: The motor assistance is switched off, and the eBike

can be moved as a normal bicycle only by pedalling. The

push assistance/start assistance cannot be activated in

this assistance level.

– “ECO”: Effective assistance at maximum efficiency for

maximum cruising range

– “TOUR”: Uniform assistance, for touring with long cruising

range

– “SPORT”: Powerful assistance for sportive riding off road

as well as for urban traffic

– “TURBO”: Maximum assistance, supporting highest ca-

dence for sportive riding

The requested motor output is displayed in indicator . The

maximum motor output depends on the selected assistance

level.

Switching the Push-assistance mode On/Off

The push-assistance feature makes it easier to push the

eBike. The speed in this function depends on the set gear and

cannot exceed 6 km/h (max.). The lower the set gear, the low-

er the speed in the push-assistance function (at full output).

 The push-assistance function may only be used when

pushing the eBike. Danger of injury when the wheels of

the eBike do not have ground contact while using the push-

assistance function.

To activate the push-assistance function, briefly press but-

ton “WALK” on your on-board computer. After activation,

press button “+” within 3 s and keep it pressed. The eBike

drive is switched on.

Note: The push assistance cannot be activated in the “OFF”

assistance level.

The push assistance is switched off as soon as one of the fol-

lowing occurs:

– you release button “+” ,

– the wheels of the eBike are blocked (e.g. by actuating the

brakes or impacting against an obstacle),

– the speed exceeds 6 km/h.

Note: On some systems the push-assistance function can be

started directly by pressing the “WALK” button.

Switching bike lights on/off

For bikes with back-pedalling function, the pedals rotate

when the push aid is switched on. If the rotating pedals are

blocked, the push aid switches off.

Notes on Riding with the eBike System

When does the eBike Drive Unit Operate?

The eBike drive unit assists you when riding, as long as you

step into the pedals. Without pedaling, there is no assistance.

The motor output always depends on the amount of your ped-

aling power.

When applying less pedaling power, the assistance or support

will be lower than when applying a lot of pedaling power. This

applies independent of the assistance Level.

The eBike drive automatically switches off at speeds in excess

of 25 km/h. When the speed falls below 25 km/h, the drive is

automatically available again.

An exception applies to the push-assistance function, in

which the eBike can be pushed at low speed without pedal-

ling. The pedals may also rotate when the push assistance is

used.

The eBike can also be ridden as a normal bicycle without as-

sistance at any time, by either switching off the eBike system

or setting the assistance level to “OFF”. The same applies

when the battery pack is empty.

Interaction of the eBike System with the Bicycle Gears

The bicycle gears should be used as with a normal bicycle,

even with eBike motor assistance (please observe the operat-

ing instructions of your eBike).

Independent of the type of gearing, it is recommended to

briefly interrupt the pedaling while changing gears. This

makes changing gears easier and reduces the wear of the

drive train.

By selecting the right gear, you can increase the speed and

range with the same pedaling effort.

Gathering First Experience

It is recommended to gather first experience with the eBike

away from roads with heavy traffic.

Test the various assistance levels. Start with the lowest assis-

tance level. As soon as you feel confident, you can ride your

eBike in traffic like any other bike.

Test the operating range of your eBike under different condi-

tions before planning longer and more challenging rides.

Assistance Level Assistance Factor*

(Derailleur)

Cruise CX

“ECO”

50 % 50 %

“TOUR”

120 % 120 %

“SPORT”

190 % 210 %

“TURBO”

275 % 300 %

* The motor output can vary for individual versions.

OBJ_BUCH-2821-001.book Page 3 Wednesday, April 13, 2016 4:38 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Performance Line Drive Unit 25 km-h in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch Performance Line Drive Unit 25 km-h Manual

Product: