97436
15
Zoom out
Zoom in
Previous page
1/99
Next page
English5
1 609 929 J68 30.1.06
“Live” wires/conductors can be detected easier when power consumers
(e.g., lamps, appliances) are connected to the wire/conductor being
sought and switched on. Wires/conductors with 110 V, 230 V and 400 V
(three-phase current) are detected with about the same scan capacity.
Under certain conditions (such as when behind metal surfaces or behind
surfaces with high water content), “live” wires/conductors cannot be
detected with certainty. These ranges can be recognised in the metal
detection function. When a measuring value is indicated all over a larger
range of the measuring indicator f, then the material is screening off elec-
trically and the scan for “live” wires/conductors is not reliable.
Wires that are not “live” can be found as metal objects with the detecting-
metal function. However, stranded cables are not indicated (contrary to
solid copper conductors).
Operating Instructions
B On condition of the principle, the measuring values can be
impaired through certain ambient conditions. These include,
e.g., the proximity of other equipment that produce strong
magnetic or electromagnetic fields, moisture, metallic building
materials, foil-laminated insulation materials or conductive
wallpaper. Therefore, please also observe other information sources
(e.g. construction plans) before drilling, sawing or routing into walls,
ceilings or floors.
Switching Off the Signal Tone
The signal tone can be switched on and off. For this, press the metal-detec-
tion button 6 and the wood-detection button 5 at the same time. When the
signal tone is switched off, the switched-off audio signal indicator j appears
on the display.
The signal tone setting is maintained after switching the measuring tool off
and on again.
Marking Objects
Detected objects can be marked as required. For this, remove the pencil
11 from the measuring tool and carry out the scan as usual. Once you have
found the limits or the centre of an object, simply mark the sought after
location through the marking opening 2.
“AutoCal” Calibration Indicator
When the check mark behind the “AutoCal” calibration indicator g
flashes over a longer period or if it is not displayed anymore, reliable scan-
ning is no longer possible. In this case, send in the measuring tool to an
authorised Bosch after-sales service agent. Exception: In the detecting
wooden objects’ function, the “AutoCal” calibration indicator g goes out
as long as the “ZOOM” button 4 is not pressed.
OBJ_BUCH-1 609 929 J68-001.book Page 5 Monday, January 30, 2006 11:20 AM
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PDO Multi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PDO Multi in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info