97436
12
Zoom out
Zoom in
Previous page
1/99
Next page
English2
1 609 929 J68 30.1.06
Technical Data
Operation
Inserting/Replacing the Battery
Use only alkali-manganese or rechargeable batteries.
To open the battery lid 10, press the latch 12 in the direction of the arrow
and fold up the battery lid. Insert the supplied battery. Pay attention that the
polarity is correct, according to the representation on the inside of the bat-
tery lid.
When the battery indication k in the display lights up, measuring is possible
for approx. 1 h when using alkali-manganese batteries (service life is shorter
with rechargeable batteries). When the battery indication k flashes, measur-
ing is still possible for approx. 10 minutes. When the battery indication k and
the illuminated ring 1 (red) are flashing, measuring is no longer possible and
the battery or the rechargeable battery respectively, must be replaced.
B If the measuring tool is not used for a long period of time, the
battery must be removed. The battery can corrode or discharge
itself over long periods.
Initial Operation
Protect the measuring tool against moisture and direct sun irradi-
ation.
Switching On and Off
B Before switching the measuring tool on, make sure that the
sensor area 9 is not moist. If required, wipe the measuring tool dry
using a cloth.
B If the measuring tool was subject to an extreme temperature
change, allow it to adjust to the ambient temperature before
switching on.
Digital Detector PDO Multi
Article number 3 603 K10 000
Maximum scanning depth*:
Ferrous metals 80 mm
Non-ferrous metals (copper) 60 mm
Copper conductors (live)** 40 mm
Wood 20 mm
Automatic switch-off after approx. 5 min
Operating temperature 10 °C ... +50 °C
Storage temperature 20 °C ... +70 °C
Battery 1 x 9 V 6LR61
Rechargeable battery 1 x 9 V 6F22
Operating lifetime
(alkali-manganese batteries) approx. 6 h
Weight according to EPTA-Procedure 01/2003 0.25 kg
* depends on material and size of objects as well as material and condition of struc-
ture
** less scanning depth for wires/conductors that are not “live”
Please observe the article number on the type plate of your measuring tool. The trade
names of the individual measuring tools may vary.
OBJ_BUCH-1 609 929 J68-001.book Page 2 Monday, January 30, 2006 11:20 AM
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PDO Multi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PDO Multi in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info