Manual Bosch PDA 240 E (page 19 of 107) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

79005

Zoom out

Zoom in

1/107

English | 19

Bosch Power Tools 1 609 929 M19 | (20.8.07)

Replacing the Sanding Plate

(see figure B)

n Slide the SDS button for release of the sand-

ing plate 4 all the way to the right.

o Remove the sanding plate 6.

p Guide the sanding plate 6 from below against

the sanding plate holder and firmly press

them together.

q Slide the SDS button for release of the sand-

ing plate 4 all the way to the left.

If, e. g., the front tip of the sanding sheet is worn,

you can also remove the complete sanding plate

and reattach it turned by 120°.

Specialty Sanding Plates

You can replace the supplied sanding plate 6

with a specialty sanding plate, which is available

as an accessory.

The specialty sanding plate is attached in the

same manner as the one supplied.

Attach and remove the respective sanding sheets

in the same manner as when changing original

sanding sheets.

Pad Extender (see figure C)

With the pad extender 7 you can sand surfaces

that are difficult to access, such as sills on win-

dows, cabinets or doors.

Pad Extender, Narrow (see figure D)

With the narrow pad extender 10 you can sand

narrow openings, slots and passages.

On the top side, a velcro backing 9 can addition-

ally be attached for fastening sanding sheets.

Pad Extender, Narrow Rounded (see figure E)

The narrow rounded pad extender 11 allows you

to sand curved and hollow areas or surfaces that

are curved inward, such as on furniture, rails or

heating radiators.

It is fitted with velcro backing on each side,

which allows for sanding sheets to be fitted on

both sides.

Operation

Starting Operation

f Observe correct mains voltage! The voltage

of the power source must agree with the

voltage specified on the nameplate of the

machine. Power tools marked with 230 V can

also be operated with 220 V.

Switching On and Off

– To start the machine, push the On/Off switch

3 towards the front to “I”.

– To switch off the machine, push the On/Off

switch 3 towards the rear to “0”.

Preselecting the Orbital Stroke Rate

The required stroke rate depends on the material

and the working conditions and can be deter-

mined through practical testing.

With the thumbwheel for preselection of the or-

bital stroke rate 2, you can preselect the required

orbital stroke rate, even during operation.

Operating Instructions

f Wait until the machine has come to a stand-

still before placing it down.

The removal capacity during sanding is mainly de-

termined by the selection of the sanding sheet as

well as the preselected orbital stroke rate.

Only flawless sanding sheets achieve good sand-

ing capacity and extend the service life of the ma-

chine.

Pay attention to apply uniform sanding pressure;

this increases the working life of the sanding

sheets.

Intensifiying the sanding pressure does not lead

to an increase of the sanding capacity, but to in-

creased wear of the machine and the sanding

sheet.

For precise on-the-spot sanding of edges, cor-

ners and hard to reach areas, it is also possible

to work only with the tip or an edge of the sand-

ing plate.

A sanding sheet that has been used for metal

should not be used for other materials.

Application examples, see figures F

–L.

Use only original Bosch sanding accessories.

OBJ_BUCH-466-001.book Page 19 Monday, August 20, 2007 3:42 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PDA 240 E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PDA 240 E Manual

Product: