97310
11
Zoom out
Zoom in
Previous page
1/57
Next page
English | 11
Bosch Power Tools 1 609 929 R04 | (13.6.08)
Technical Data
Assembly
Inserting/Replacing the Battery
Use only alkali-manganese batteries.
To open the battery lid 5, press on the latch 4 and
fold the battery lid up. Insert the batteries. When
inserting, pay attention to the correct polarity
according to the representation on the inside of
the battery compartment.
Always replace all batteries at the same time.
Only use batteries from one brand and with the
identical capacity.
f Remove the batteries from the measuring
tool when not using it for extended periods.
When storing for extended periods, the bat-
teries can corrode and discharge themselves.
Operation
Initial Operation
f Protect the measuring tool against moisture
and direct sun irradiation.
f Do not subject the measuring tool to extreme
temperatures or variations in temperature.
As an example, do not leave it in vehicles for
longer periods. In case of large variations in
temperature, allow the measuring tool to ad-
just to the ambient temperature before putting
it into operation.
f Avoid heavy impact to or falling down of the
measuring tool. Damage to the measuring
tool can impair its accuracy. After heavy im-
pact or shock, compare the laser line with a
known horizontal or vertical reference line.
f Switch the measuring tool off during trans-
port. When switching off, the levelling unit,
which can be damaged in case of intense
movement, is locked.
Switching On and Off
To switch on the measuring tool, push the
On/Off switch 3 to the “On” position. Imme-
diately after switching on, the measuring tool
sends two laser beams out of the exit opening 1.
f Do not point the laser beam at persons or
animals and do not look into the laser beam
yourself, not even from a large distance.
To switch off the measuring tool, push the
On/Off switch 3 to the “Off” position. When
switching off, the levelling unit is locked.
f Do not leave the switched on measuring tool
unattended and switch the measuring tool
off after use. Other persons could be blinded
by the laser beam.
Cross-line Laser PCL 10
Article number
3 603 K08 1..
Working range to approx.
10 m
Levelling accuracy
± 0.5 mm/m
Self-levelling range,
typically
±
Levelling duration, typically
4s
Operating temperature
+5 °C ... +40 °C
Storage temperature
20 °C ... +70 °C
Relative air humidity, max.
90 %
Laser class
2
Laser type
635 nm, <1 mW
C
6
>10
Tripod mount
1/4"
Batteries
2x1.5VLR6(AA)
Operating life time, approx.
15 h
Weight according to
EPTA-Procedure 01/2003 0.4 kg
Dimensions
108 x 66 x 92 mm
Please observe the article number on the type plate of
your measuring tool. The trade names of the individual
measuring tools may vary.
OBJ_BUCH-693-002.book Page 11 Friday, June 13, 2008 2:17 PM
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PCL 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PCL 10 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info