97308
13
Zoom out
Zoom in
Previous page
1/69
Next page
English3
1 609 929 J06 • (05.07) T
Protect the unit from strong impacts and falls. Damage to the unit can
degrade the accuracy.
After a strong impact or fall, check the laser line by comparing with a
known horizontal or vertical reference line.
Transport and store the unit in the protective bag 8.
Use Alkali-Manganese batteries exclusively.
Open the battery compartment cover 5 and insert the batteries provided.
When inserting the batteries, pay attention to the correct polarisation.
Always replace all batteries at the same time. Use only batteries from a
single manufacturer and with the same capacity.
Switching on:
When switched on, the instrument immediately emits a laser beam
from the outlet opening 3. Do not direct the laser beam at persons
or animals and do not look directly into the laser beam (espe-
cially not with optical instruments).
Press the on/off switch 2 in the “ON” direction. The instrument always
starts in the crossed line mode with levelling control.
Switching off:
Press the on/off switch 2 in the “OFF” direction. The instrument is
switched off. The laser unit is locked.
Operation with Levelling Control
With levelling control, the instrument automatically compensates for une-
venness within the self-levelling range of approx. 5°. The levelling is com-
plete as soon as the laser line no longer moves. If automatic levelling is
not possible, for example when the surface on which it is standing devi-
ates more than 5° from the horizontal, a warning signal sounds and the
laser switches itself off. In this case, reposition the instrument to horizon-
tal and wait for the self-levelling to complete.
Crossed Line Operation (see Fig. )
Place the instrument on a firm horizontal surface or attach to a tri-
pod and switch on. The laser is in crossed line operation with lev-
elling control and produces a horizontal and a vertical line.
Horizontal Operation (see Fig. )
Press the measuring mode button “mode” 1 once. The laser is in
horizontal operation with levelling control and produces a horizontal
line.
Vertical Operation (see Fig. )
Press the measuring mode button “mode” 1 again or press twice
directly after switching on. The laser is in vertical operation with lev-
elling control and produces a vertical line.
Inserting/Replacing the Batteries
Putting into Operation
Measurement Functions
C
D
E
pcl1_bu_1609929J06_t.fm Seite 3 Freitag, 29. Juli 2005 9:57 09
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PCL 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PCL 1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info