Manual Bosch PBH300E (page 18 of 109) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

32141

Zoom out

Zoom in

1/109

1 619 929 766 | (26.7.07) Bosch Power Tools

18 | English

The vibration emission level given in this informa-

tion sheet has been measured in accordance

with a standardised test given in EN 60745 and

may be used to compare one tool with another. It

may be used for a preliminary assessment of ex-

posure.

The declared vibration emission level represents

the main applications of the tool. However if the

tool is used for different applications, with differ-

ent accessories or poorly maintained, the vibra-

tion emission may differ. This may significantly

increase the exposure level over the total work-

ing period.

An estimation of the level of exposure to vibra-

tion should also take into account the times

when the tool is switched off or when it is run-

ning but not actually doing the job. This may sig-

nificantly reduce the exposure level over the total

working period.

Identify additional safety measures to protect the

operator from the effects of vibration such as:

maintain the tool and the accessories, keep the

hands warm, organisation of work patterns.

Declaration of Conformity

We declare under our sole responsibility that the

product described under “Technical Data” is in

conformity with the following standards or

standardization documents: EN 60745 according

to the provisions of the directives 2004/108/EC,

98/37/EC (until Dec. 28, 2009), 2006/42/EC

(from Dec. 29, 2009 on).

Technical file at:

Robert Bosch GmbH, PT/ESC,

D-70745 Leinfelden-Echterdingen

28.06.2007, Robert Bosch GmbH, Power Tools Division

D-70745 Leinfelden-Echterdingen

Assembly

f Before any work on the machine itself, pull

the mains plug.

Auxiliary Handle

f Operate your machine only with the auxiliary

handle 8.

The auxiliary handle 8 can be set to any position

for a secure and low-fatigue working posture.

Turn the bottom part of the auxiliary handle 8 in

counterclockwise direction and swivel the auxil-

iary handle 8 to the desired position. Then

retighten the bottom part of the auxiliary handle

8 by turning in clockwise direction.

Adjusting the Drilling Depth (see figure A)

The required drilling depth X can be set with the

depth stop 9.

Loosen the wing bolt for the depth stop adjust-

ment 7 and insert the depth stop rod into the

auxiliary handle 8.

Insert the SDS-plus drilling tool to the stop into

the SDS-plus tool holder 1. Otherwise, the mova-

bility of the SDS-plus drilling tool can lead to in-

correct adjustment of the drilling depth.

Pull out the depth stop until the distance be-

tween the tip of the drill bit and the tip of the

depth stop correspond with the desired drilling

depth X.

Retighten the wing bolt for the depth stop adjust-

ment 7 again.

The knurled surface of the depth stop 9 must

face upward.

Selecting the Tool Holder

For hammer drilling, SDS-plus drilling tools that

can be inserted into the SDS-plus tool holder 1

are required.

For drilling without impact in wood, metal, ce-

ramic and plastic as well as for screwdriving and

tapping, use non-SDS-plus drilling tools (e. g.,

drill bits with cylindrical shank). A keyless drill

chuck is required for such drilling tools.

Dr. Egbert Schneider

Senior Vice President

Engineering

Dr. Eckerhard Strötgen

Head of Product

Certification

OBJ_BUCH-440-001.book Page 18 Thursday, July 26, 2007 9:22 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PBH300E in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch PBH300E

Bosch PBH300E User Manual - English, German, French, Spanish - 81 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PBH300E Manual

Product: