Manual Bosch PBH220RE (page 21 of 142) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

32137

Zoom out

Zoom in

1/142

English | 21

Bosch Power Tools 1 619 929 804 | (16.10.07)

Noise/Vibration Information

Measured values determined according to

EN 60745.

Typically the A-weighted noise levels of the

product are: Sound pressure level 86 dB(A);

Sound power level 97 dB(A). Uncertainty

K=3dB.

Wear hearing protection!

Vibration total values (triax vector sum) deter-

mined according to EN 60745:

Hammer drilling into concrete: Vibration emis-

sion value a

=14 m/s

, Uncertainty K=1,5 m/s

Chiselling: Vibration emission value a

=9 m/s

Uncertainty K=1,5 m/s

The vibration emission level given in this infor-

mation sheet has been measured in accordance

with a standardised test given in EN 60745 and

may be used to compare one tool with another.

It may be used for a preliminary assessment of

exposure.

The declared vibration emission level repre-

sents the main applications of the tool. However

if the tool is used for different applications, with

different accessories or poorly maintained, the

vibration emission may differ. This may signifi-

cantly increase the exposure level over the total

working period.

An estimation of the level of exposure to vibra-

tion should also take into account the times

when the tool is switched off or when it is run-

ning but not actually doing the job. This may sig-

nificantly reduce the exposure level over the to-

tal working period.

Identify additional safety measures to protect

the operator from the effects of vibration such

as: maintain the tool and the accessories, keep

the hands warm, organisation of work patterns.

Assembly

f Before any work on the machine itself, pull

the mains plug.

Auxiliary Handle

f Operate your machine only with the auxilia-

ry handle 11.

Rotating the Auxiliary Handle (see figure A)

The auxiliary handle 11 can be set to any posi-

tion for a secure and low-fatigue working pos-

ture.

– Turn the wing bolt for adjustment of the aux-

iliary handle 18 in anticlockwise direction

and set the auxiliary handle 11 to the re-

quired position. Then tighten the wing bolt

18 again in clockwise direction.

Adjusting the Drilling Depth (see figure B)

The required drilling depth X can be set with the

depth stop 9.

– Loosen the wing bolt for depth stop adjust-

ment 19.

– Pull out the depth stop until the distance be-

tween the tip of the drill bit and the tip of the

depth stop correspond with the desired drill-

ing depth X.

– Retighten the wing bolt for the depth stop

adjustment 19 again.

Selecting Drill Chucks and Tools

For hammer drilling and chiselling, SDS-plus

tools are required that are inserted in the SDS-

plus drill chuck.

For drilling without impact in wood, metal, ce-

ramic and plastic as well as for screwdriving,

use the quick change keyless chuck and drilling

tools without SDS-plus.

OBJ_BUCH-495-002.book Page 21 Tuesday, October 16, 2007 3:09 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PBH220RE in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch PBH220RE

Bosch PBH220RE User Manual - English - 142 pages

Bosch PBH220RE User Manual - English - 70 pages

Bosch PBH220RE User Manual - German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish - 142 pages

Bosch PBH220RE User Manual - Spanish - 70 pages

Bosch PBH220RE User Manual - Norwegian, Finnish - 142 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PBH220RE Manual

Product: