544064
13
Zoom out
Zoom in
Previous page
1/63
Next page
English | 13
Bosch Power Tools 1 609 92A 0PY | (9.7.14)
Switching On and Off (PAS 11-21/PAS 12-27)
–To start the vacuum cleaner, set the On/Off switch 9 to po-
sition “I”.
–To switch off the vacuum cleaner, set the On/Off switch 9
to position “0”.
Switching On and Off (PAS 12-27 F)
–To start the vacuum cleaner, set the mode selector switch
9 to position “I”.
–To switch off the vacuum cleaner, set the mode selector
switch 9 to position “0”.
Operation with remote automatic switching (see figure B)
(PAS 12-27 F)
A socket outlet with earthing contact 3 is integrated in the
vacuum cleaner, which allows for connection of an external
power tool. The vacuum cleaner is automatically put into op-
eration via the power tool. Observe the maximal allowable
load of the connected power tool.
For connecting power tools, various hose systems are availa-
ble as accessories.
Set the mode selector switch 9 to position “II”.
–To start the operation of the vac, switch on the power tool
connected to the socket 3. The vacuum cleaner starts au-
tomatically.
–To switch off the vac, switch off the power tool. The vacu-
um cleaner switches off automatically approx. 6 seconds
later.
Wet Vacuuming
CAUTION! This appliance is not suitable for picking up
hazardous dust. Do not vacuum inflammable or explo-
sive fluids; for example, benzene, oil, alcohol, solvents.
Do not vacuum hot or burning dust. Do not operate the
machine in rooms where the danger of an explosion ex-
ists. The dusts, vapours or fluids can ignite or explode.
The vacuum cleaner may not be used as a water pump.
The vacuum cleaner is intended for vacuuming air and wa-
ter mixtures.
Before any work on the vacuum cleaner itself, pull the
mains plug.
Note: Before wet vacuuming, the dust bag 14 must be re-
moved and the container 5 must be emptied.
The vacuum cleaner is equipped with a float 12. When the
maximum filling height is reached, the vacuum cleaner
switches off. Set the On/Off switch 9 to position “0” and
empty the container 5.
–After vacuuming, remove the permanent filter 11 to pre-
vent the forming of mould and allow it to dry thoroughly;
especially before using it for dry vacuuming.
Maintenance and Service
Maintenance and Cleaning
Before any work on the vacuum cleaner itself, pull the
mains plug.
For safe and proper working, always keep the vacuum
cleaner and ventilation slots clean.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
Removing/Replacing the Permanent Filter (see figure C)
To maintain the optimum performance of the vacuum
cleaner, clean the permanent filter 11 by brushing off or
rinsing with water after each use.
The permanent filter 11 can be replaced, if required. Cut
through the band at the soiled permanent filter 11 and re-
move the inserted plastic basket 15. Press the plastic bas-
ket 15 firmly into the new permanent filter 11.
Container
Wipe out the container 5 from time to time with a commer-
cially available, non-scouring cleaning agent and allow to
dry.
Malfunctions
In the case of insufficient vacuuming performance, check the
following:
Is the vacuum lid 10 attached properly?
Is the hose system clogged?
Are the extension tubes connected firmly?
Is the container 5 full?
Is the dust bag 14 full?
Is the permanent filter 11 clogged with dust?
Emptying at regular intervals ensures optimum vacuuming
performance.
If the vacuuming performance is not achieved thereafter, take
the vacuum cleaner to customer service.
After-sales Service and Application Service
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the vacuum cleaner.
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch’s application service team will gladly answer questions
concerning our products and their accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0844) 7360109
E-Mail: boschservicecentre@bosch.com
OBJ_BUCH-860-007.book Page 13 Wednesday, July 9, 2014 12:46 PM
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PAS 11-21 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PAS 11-21 in the language / languages: All languages as an attachment in your email.

The manual is 4,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info