764282
25
Zoom out
Zoom in
Previous page
1/183
Next page
English | 25
uDo not expose the measuring tool to any extreme temperatures or
variations in temperature. For example, do not leave it in a car for ex-
tended periods of time. In case of large variations in temperature, allow
the measuring tool to adjust to the ambient temperature before putting it
into operation. The precision of the measuring tool may be compromised
if exposed to extreme temperatures or variations in temperature.
uKeep the supporting surfaces and contact edges of the measuring
tool clean. Protect the measuring tool against shock and impact. Dirt
particles or deformations can lead to faulty measurements.
Switching On and Off
To switch on the measuring tool, press the on/off button(11).
After switching on, the measuring tool is in "normal measuring" operating
mode.
To switch off the measuring tool, press the on/off button(11).
When no activity is performed on the measuring tool for approx. 5minutes,
the measuring tool automatically switches off to save the batteries.
Aligning with the Spirit Levels
The measuring tool can be aligned horizontally with spirit level(5) and ver-
tically with spirit level(6).
The measuring tool can also be used as a carpenter’s spirit level for checking
vertical and horizontal lines. For this, place or hold the measuring tool
against the surface subject to checking.
"Normal measuring" Operating Mode
After switching on, the measuring tool is always in "normal measuring" oper-
ating mode.
Measuring Angles (seefiguresC–E)
Place the fold-out leg (1) and the base leg(3) flat on the surfaces adjacent
to the angle. The displayed measured value(a) corresponds with the interior
anglew between the base leg and the fold-out leg.
This measured value is shown on the display(4) until you change the angle
between fold-out leg(1) and base leg(3).
Transferring Angles (seefigureC)
Measure the angle to be transferred by placing the fold-out leg and base leg
on the target angle.
Bosch Power Tools 1 609 92A 56P | (12.07.2019)
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PAM 220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PAM 220 in the language / languages: All languages as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info