97294
9
Zoom out
Zoom in
Previous page
1/56
Next page
English - 2
2 609 931 950 • TMS • 06.10.00
Allow the heated battery to cool before charg-
ing.
Do not open the battery, and protect from im-
pact. Store in a dry and frost-free place.
Cover the contacts of a removed battery. Dan-
ger of fire results when shorted by a metal ob-
ject!
Bosch is only able to ensure perfect functioning
of the machine if the original accessories in-
tended for it are used.
Battery Charging
A battery that is new or has not been used for a
longer period does not develop its full capacity
until after approximately 5 charging/discharging
cycles.
Disengage the battery
9
by pressing the releasing
knob
10
on both sides and pulling down, out of
the handle.
Do not exert any force.
For commissioning the fast battery charger and
for a description of the charging procedure,
please consult the battery charger operating in-
structions provided.
The battery is equipped with an NTC temperature
monitor which allows charging only within a tem-
perature range of between 0 °C and 45 °C. A long
battery service life is achieved in this manner.
When used properly, the battery can be re-
charged up to
3000 times
.
A substantial drop in the operating time per
charge indicates that the battery is worn out and
must be replaced.
When using Bosch NiMH batteries, the
performance capabilities are limited at
temperatures below –10 °C.
Observe the notes on environmental pro-
tection.
Inserting the Battery
Slide the transport safety-lock
switch
6
to the left-hand position
(“Lock”).
Push the charged battery
9
into
the grip, until it is heard to notch.
Switching On and Off
Slide the transport safety-lock
switch
6
to the right-hand position.
Switch on the machine using the
On/Off switch
7
.
If a force of over 60 N is exerted on the
On/Off switch 7, the device can still
switch on despite the transport safety-
lock switch being set.
Pressure value display
By pressing the button
13
the pressure display
11
is switched on.
The pressure display
11
must be calibrated if
“ERR”
is shown on the display.
To do this, press a pointed gadget into the calibra-
tion opening
12
for approx. 5 seconds (reset func-
tion).
For alternating between the measuring units, i.e.
bar, psi and kg/cm
2
(1 bar
־
1 kg/cm
2
־
15 psi),
it is necessary to press the button
13
once again
after actuating the pressure display.
The pressure display
11
goes out after approx.
90 seconds.
Before Putting into Operation
Initial Operation
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PAG 12 V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PAG 12 V in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info