657511
19
Zoom out
Zoom in
Previous page
1/92
Next page
English2
1 270 020 XBN | (12.5.16) Bosch eBike Systems
14 Increase assistance level button
15 Button push/start aid “WALK”
16 Lock latch for on-board computer
17 Locking screw for on-board computer
USB charging cable (Micro A Micro B)*
* not illustrated; available as accessory
Technical Data
Assembly
Inserting and removing the on-board computer
(see figure A)
To insert the on-board computer 3, slide it from the front into
the holder 4.
To remove the on-board computer 3, press the lock latch 16
and slide the on-board computer toward the front out of the
holder 4.
Remove the on-board computer when you park the
eBike.
It is possible to secure the on-board computer against
removal in the holder. To do so, remove the holder 4 from the
handlebar. Put the on-board computer in the holder. Screw
the locking screw 17 (thread M3, 8 mm long) from below into
the thread provided in the holder. Mount the holder back onto
the handlebar.
Operation
Initial Operation
Requirements
The eBike system can only be activated when the following
requirements are met:
A sufficiently charged eBike battery pack is inserted (see
operating instructions of the battery pack).
The on-board computer is properly inserted in the holder
(see “Inserting and removing the on-board computer”,
page English2).
Switching the eBike System On/Off
Options for switching on the eBike system:
Place the on-board computer into the holder 4.
When the on-board computer and the eBike battery pack
are inserted, briefly press the On/Off button 5 of the on-
board computer.
When the on-board computer is inserted, press the On/Off
button of the eBike battery pack (see battery pack operat-
ing instructions).
The drive is activated as soon as you step on the pedals (ex-
cept for in the push assistance function or in assistance level
“OFF”). The motor output depends on the settings of the as-
sistance level on the on-board computer.
As soon as you stop pedaling when in normal operation, or as
soon as you have reached a speed of 25/45 km/h, the assis-
tance from the eBike drive is switched off. The drive is auto-
matically re-activated as soon you start pedaling again and the
speed is below 25/45 km/h.
Options for switching off the eBike system:
Press the On/Off button 5 of the on-board computer for at
least 1 second.
Switch the eBike battery pack off by its On/Off button (see
battery pack operating instructions).
Remove the on-board computer out of its holder.
If no power is drawn from the drive for about 10 minutes (e.g.
because the eBike is not moving) or no button is pressed on
the Nyon, the eBike system will shut down automatically to
save energy.
On-board computer Nyon
Article number 1 270 020 907/915
Internal memory in total
1 270 020 907
1 270 020 915
GB
GB
1
8
Max. charging current,
USB connection mA 500
Charging voltage,
USB connection V5
USB charging cable1) 1 270 016 360
Operating temperature °C –5...+40
Storage temperature °C –10...+50
Charging temperature °C 0...+40
Internal lithium-ion battery V
mAh
3.7
710
Protection type2) IP x7 (watertight)
Supported wi-fi standards 802.11b/g/n
(2.4 GHz)
Weight, approx. kg 0.2
1) Not included as part of standard delivery
2) When USB cover is closed
OBJ_BUCH-2616-002.book Page 2 Thursday, May 12, 2016 12:37 PM
English3
Bosch eBike Systems 1 270 020 XBN | (12.5.16)
The “Nyon” operating system
The Nyon operating system consists of three components:
the Nyon on-board computer with operating unit
the smartphone application “Bosch eBike Connect”
the online portal “www.eBike-Connect.com”
Many configurations and features can be managed and used
on all components. Some configurations and features can be
accessed or operated only via certain components. The syn-
chronization of data occurs automatically during Bluetooth®-/
internet connection. The following table provides an overview
of the available features.
Premium features
The standard features of the “Nyon” operating system can be
expanded via the App Store for Apple iPhones and Google
Play Store for Android devices through the purchase of “pre-
mium features”.
In addition to the free application “Bosch eBike Connect”
there are several fee-based premium features. A detailed list
of available additional applications can be found in the online
manual under “www.Bosch-eBike.com/nyon-manual”.
Initial Operation of the On-board Computer
The battery pack is supplied partially charged. Before the first
use, the Nyon battery pack must be fully charged via the USB
port (see “Energy supply of the on-board computer”, page
English7) or the eBike system.
In order to use all the features of the operating system, you
must also register online.
Registration at the On-board Computer
Switch on the on-board computer using the On/Off but-
ton 5.
Use the joystick 1 to select your preferred language (select
by pressing the joystick) and follow the instructions.
You have the following options to put Nyon into operation:
“TEST RIDE”
You can perform a test ride without having to register in ad-
vance or to enter data. After shutting down, all trip data will
be deleted.
“SET UP”>“OFFLINE”
This is a very short registration process limited to Nyon.
Offline means in this case that your journey and user data
are only saved locally on the on-board computer.
Follow the instructions and choose one of the suggested
answers. Entered data is kept after shutting Nyon down,
but will not be synced to the online portal or smartphone
application.
“SET UP”>“ONLINE”>“PHONE”
This is a complete registration process.
Insert Nyon in the holder 4, download the application
“Bosch eBike Connect” to your smartphone and register
using the application. Following registration, the journey
data are stored and synchronized with the smartphone ap-
plication and the online portal.
“REGISTR.”>“ONLINE”>“WI-FI”
This is a complete registration process. Go to an access
point of a wi-fi network. Place your Nyon in the holder 4. Af-
ter selecting a network and entering your ID and password,
Nyon then connects to the WLAN network of your choice
and you are directed to the “www.eBike-Connect.com”
online portal where you can register. Following registra-
tion, the journey data are stored and synchronized with the
online portal. You can then connect your Nyon to your
smartphone (“Settings”>“Connections”> “Connect
Smartphone”).
On-board computer
Smartphone application
Online portal
Log in/registration 
Change of configurations 
Recording of journey data
Real-time display of journey data
Processing/analysis of journey data
Creating user-defined displays
Displays the current location* 
Navigation
Route planning 
Display of remaining distance
(circle around the current location) 
Training effect in real-time
Overview of journeys
Statistics “Dashboard” 
Purchase of “premium features”
*GPS required
GSM,
3/4G www
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch Nyon at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Nyon in the language / languages: English, German, Dutch, French, Italian, Norwegian as an attachment in your email.

The manual is 18,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch Nyon

Bosch Nyon User Manual - English - 65 pages

Bosch Nyon User Manual - German - 71 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info