Manual Bosch Nyon Performance Line (page 25 of 151) (English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish)

657611

Zoom out

Zoom in

1/151

English–9

Bosch eBike Systems 1 270 020 XBN | (12.5.16)

After releasing the “+” button, the push assistance remains on

standby for another three seconds. Pressing the “+” button

again within this period will reactivate the push assistance.

Note: On some systems the push-assistance function can be

started directly by pressing the “WALK” button.

Note: The push assistance cannot be activated in the “OFF”

assistance level.

Switching bike lights on/off

In the model, in which the lighting is powered by the eBike

system, the front and rear light can be switched on and off at

the same time via the on-board computer with the button 6.

The illumination symbol s1 is displayed when the light is on.

Switching the bike light on and off has no effect on the back

lighting of the display.

eShift (optional)

eShift is the integration of automatic gear shifting systems in-

to the eBike system. You can configure the settings for the

“eShift” function under “My eBike”. The gear or the cadence

is displayed in the “Ride”, “Fitness” and “Map & Naviga-

tion” operating modes. If the field is not displayed, the user is

informed of changes by means of an indication on the display.

eShift mode is activated by holding down the “Home” button

12. It is only possible to activate eShift mode via the operating

unit 10. You can exit “eShift” mode again by repeatedly

pressing the “Home” button.

eShift with NuVinci H|Sync

The optimum gear for the respective speed is automatically

set according to a pre-defined desired cadence. In manual

mode you can choose between multiple gears.

In the “Cadence Control” mode, you can use the “–” or “+”

button on the operating unit to increase or decrease the re-

quired cadence. If you hold down the “–” or “+” button, the

cadence will increase or decrease in increments of five. The

desired cadence is shown on the display.

In the “Gear Control” mode, you can use the “–” or “+” but-

ton on the operating unit to switch back and forth between

several defined transmission ratios. The engaged gear is

shown on the display.

Under “Gear calibration”, you can calibrate the continuously

variable transmission. Then follow the instructions on the dis-

play.

In the event of an error, it can also be necessary to perform

calibration when riding. Confirm the calibration here too, and

follow the instructions on the display.

eShift with SRAM DD3 Pulse

The hub gear of the SRAM DD3 Pulse works on a speed-de-

pendent basis. Regardless of which gear is engaged on the de-

railleur gears, one of the three gears of the gear hub will auto-

matically be engaged.

It is also possible to use the “–” or “+” button to shift gear

manually here. Automatic mode is activated automatically if

you press the “–” button in first gear. If you press the “–” or

“+” button in automatic mode, the mode changes back to

manual mode. In automatic mode, only “A”

is ever shown in

the gear display. If the gear is shifted in automatic mode, the

gear is not shown on the display.

If you are not in automatic mode, the engaged gear will be

shown briefly on the display whenever the gear of the hub

gear is shifted.

The drive unit recognises the gear shift and briefly reduces

the motor assistance level as a result of it, which means the

gear can also be shifted at any time under load or on a hill.

If the eBike is brought to a stop from a speed of more than

10 km/h, the system may automatically shift down a gear to a

set “Starting gear”. The “Starting gear” can be set under

“My eBike”> “eShift (SRAM)”.

eShift with Shimano Di2

For Shimano eShift you use the Shimano control lever to shift

gears.

The gear is always displayed in the eShift field. The gear is dis-

played briefly during a gear shift only when the eShift field is

not visible (e.g. in settings).

The drive unit recognises the gear shift and briefly reduces

the motor assistance level as a result of it, which means the

gear can also be shifted at any time under load or on a hill.

If the eBike is brought to a stop from a speed of more than

10 km/h, the system may automatically shift down a gear to a

set “Starting gear”. The “Starting gear” can be set under

“My eBike”> “eShift (Shimano)”.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Nyon Performance Line in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 9,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch Nyon Performance Line Manual

Product: