745972
23
Zoom out
Zoom in
Previous page
1/36
Next page
Troubleshooting en
23
14.1 Malfunctions
Fault Cause and troubleshooting
The appliance is not working. The circuit breaker is faulty.
Check the circuit breaker in the fuse box.
There has been a power cut.
Check whether the lighting in your kitchen or other appliances are working.
The appliance does not switch off
fully at the end of a cooking time.
At the end of a cooking time, the appliance stops heating up. The oven light and
cooling fan do not switch off. For types of heating with recirculation, the fan con-
tinues to run in the back wall of the cooking compartment.
Turn the function selector to the off position.
aThe appliance is switched off.
aThe oven light and the fan in the back wall are switched off.
aThe cooling fan switches off automatically as soon as the appliance has
cooled down.
The time flashes in the display. There has been a power cut.
Reset the time.
→"Setting the time on the clock", Page13
lights up in the display
and no settings can be made on
the appliance.
Childproof lock is activated.
Use the button to deactivate the childproof lock.
→"Childproof lock", Page13
A message with appears in the
display, e.g. - .
Electronics fault
1. Press the button.
If required, reset the time.
aIf the fault was a one-off, the error message disappears.
2. If the error message appears again, call the after-sales service. Quote the ex-
act error message and the E no. of your appliance.
→"Customer Service", Page24
14.2 Replacing the oven light bulb
If the light in the cooking compartment fails, change
the oven light bulb.
Note:Heat-resistant, 25-watt, 230 V halogen bulbs are
available from the after-sales service or specialist retail-
ers. Only use these bulbs. Hold the new halogen bulbs
only with a clean, dry towel. This increases the service
life of the bulb.
WARNING‒Risk of burns!
The appliance gets very hot.
Never touch the inside surfaces of the cooking com-
partment or the heating elements while they are hot.
Always allow the appliance to cool down.
Keep children at a safe distance.
WARNING‒Risk of electric shock!
When changing the bulb, the bulb socket contacts are
live.
Before replacing the bulb, unplug the appliance
from the mains or switch off the circuit breaker in
the fuse box.
Requirements
¡The appliance is disconnected from the power sup-
ply.
¡The cooking compartment has cooled down.
¡You have a new halogen bulb to replace the old one.
1. Place a tea towel in the cooking compartment to
prevent damage.
2. Turn the glass cover anti-clockwise to remove it ⁠.
3. Pull out the halogen bulb without turning it ⁠.
4. Insert the new halogen lamp and press it firmly into
the socket.
Make sure the pins are positioned correctly.
5. Depending on the appliance model, the glass cover
may have a sealing ring. Put the sealing ring in posi-
tion.
6. Screw the glass cover on.
7. Take the tea towel out of the cooking compartment.
8. Connect the appliance to the power supply.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch NBS533BS0B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch NBS533BS0B in the language / languages: English as an attachment in your email.

The manual is 4,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info