773050
14
Zoom out
Zoom in
Previous page
1/104
Next page
14
en Preparation
Do not process frozen food.
The length of the cubes can be influenced
by increasing or reducing the pressure on
the pusher when pushing down.
Recommended speeds
1e.g. boiled potatoes, carrots
and eggs, cucumbers, bananas,
strawberries, melons
3e.g. raw potatoes and carrots,
soft sausage (e.g. mortadella),
hard cheese, peppers, tomatoes,
onions, apples, kiwifruit
Caution!
If these guidelines are not observed,
the dicer, including the cutting grid and
the rotating blade, may be damaged.
If the dicer is not used as intended, is
modified or is used improperly, Robert
Bosch Hausgeräte GmbH cannot
assume liability for any resulting
damage. Also excluded is the liability
for damage (e.g. blunt or deformed
blades) which result from processing
unapproved food.
Preparation
W Risk of injury
Do not grasp the sharp cutter disc or
cutting grid. Take hold of the cutter disc
and cutting grid only by the edge!
Before attaching or removing
the accessory, wait until the drive
has come to a standstill and pull out
the mains plug.
The accessory must be completely
assembled before use.
Never assemble the accessory on the
base unit.
The accessory should only be used in
the intended operating position.
Caution!
The dicer insert may only be used with the
MUZ9VL1 continuous-feed shredder.
X Image sequence B
1. Insert the cutting grid into the base
holder as shown. Observe the recesses.
2. Fit the cutter disc with the blade guard
onto the base holder.
3. Press in the 4 catches until they
engage.
4. Insert the disc holder in the housing.
Both wings must be at the bottom.
5. Fit the dicer insert onto the disc
holder (,).
6. Remove the blade guard.
7. Fit the lid (,).
8. Rotate the lid in a clockwise direction as
far as possible (;).
Use
W Risk of injury
Never reach into the feed chute. Only use
the pusher provided when adding food.
Caution!
Prevent the cut ingredients from building
up in the outlet opening.
Do not apply great force with the pusher.
Important: Only prepare the base unit as
described in the main operating instructions.
The continuous-feed shredder can only
be operated if the bowl is fitted properly
(without lid).
X Image sequence C
1. Position the prepared continuous-feed
shredder on the front yellow drive as
shown.
2. Press down and rotate in a clockwise
direction as far as possible.
3. Plug the mains plug into the mains. Turn
the rotary switch to the recommended
speed.
4. Add the prepared food to the feed chute.
5. Only use the pusher provided to add
food.
6. When you have finished processing or
when the processed food in the bowl
almost reaches the outlet opening,
turn the rotary switch to y. Wait
until the drive comes to a standstill.
Disconnect the mains plug.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch MUZ9CC1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MUZ9CC1 in the language / languages: All languages as an attachment in your email.

The manual is 3.27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info