Manual Bosch MUZ5BS1 (page 6 of 51) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

765845

Zoom out

Zoom in

1/51

Robert Bosch Hausgeräte GmbH 5

For your safety

The accessories are suitable for the food processor MUM5... .

Follow the operating instructions for the food processor MUM5… .

This appliance is suitable for mincing and mixing raw or cooked meat,

bacon, poultry and fish. It must not be used for processing other objects or

substances.

Other applications are possible if the accessories approved by the

manufacturer are used.

,Safety instructions for this appliance

Risk of injury!

Do not reach into the feed tube, always use the pusher to add more

ingredients.

Do not attach/remove the mincer until the drive is at a standstill.

Important!

Use the mincer in the specified operating position only.

The mincer must be completely assembled before use. Never assemble

the mincer attachment on the base unit.

Overview

Please fold out the illustrated pages.

Fig. 

1 Mincer attachment

aThreaded ring

bPerforated disc (hole diameter 4.5 mm)

cBlade

dWorm gear with driver

eLocking lever

fSeal

2 Filler tray

3 Pusher

Optional accessories

4 Fruit press attachment

5 Viennese whirl attachment

6 Grater attachment

7 Perforated disc

(hole diameter 3 mm and 6 mm)

Fig. 

Operating position

Protection from overload

To prevent serious damage to your appliance

if the mincer is overloaded, the driver has

a notch (predetermined breaking point).

If an overload occurs, the driver breaks instead.

However, the driver can easily be replaced.

A new driver is available from customer service.

Unscrew fastening screw on the worm gear.

Replace driver.

Tighten fastening screw.

Operating the appliance

Thoroughly clean the mincer before using for

the first time, see “Cleaning and care”.

Assemble mincer attachment in the

indicated sequence (Fig. ). Do not fully

tighten threaded ring.

Insert seal. Note position (Fig. )!

Fig. 

Press the Release button and move

the swivel arm to position 4.

Connect mincer to the drive.

Note position of the driver (1d) with

respect to the drive. If required, turn the

driver slightly.

To do this, the threaded ring must not

be screwed tightly!

Important information

In these instructions for use the recommended

reference values for the operating speed refer to

appliances with a 7-setting rotary switch.

For appliances with a 4-setting rotary switch

you can find the values in brackets after

the values for a 7-setting rotary switch.

MUZ5FW1_alle.book Seite 5 Donnerstag, 25. September 2014 10:16 10

6Robert Bosch Hausgeräte GmbH

Turn mincer anti-clockwise.

Press down locking lever.

Now tighten the threaded ring.

Attach filler tray.

Place a bowl or plate under the outlet

opening.

Insert the mains plug.

Set rotary knob to setting 7 (4).

Place the food to be processed in the filling

tray.

Use the pusher to push in ingredients.

t~êåáåÖ>

aç=åçí=éêçÅÉëë=ÄçåÉëK

Tip: Process steak tartare through the mincer

twice.

After using the appliance

Switch off the appliance with the rotary

switch.

Lift up locking lever.

Rotate the mincer in a clockwise direction

and remove.

Clean mincer.

Cleaning and servicing

^ííÉåíáçå>

aç=klq=ìëÉ=~Äê~ëáîÉ=ÅäÉ~åáåÖ=~ÖÉåíëK=

pìêÑ~ÅÉë ã~ó=ÄÉ=Ç~ã~ÖÉÇK

jáåÅÉê=~åÇ=áåÇáîáÇì~ä=é~êíë=~êÉ=åçí=

ÇáëÜï~ëÜÉêJéêççÑK

Loosen threaded ring and disassemble

attachment.

Rinse individual parts by hand and dry

immediately.

Optional accessories

(available from dealers)

t~êåáåÖ>

^äï~óë=~ëëÉãÄäÉ=íÜÉ=~ÅÅÉëëçêáÉë=ïáíÜçìí=

Ää~ÇÉë=~åÇ=éÉêÑçê~íÉÇ=ÇáëÅëK=

cçääçï=~ää=áåëíêìÅíáçåë=ãÉåíáçåÉÇ=~ÄçîÉ=

ÅçåÅÉêåáåÖ=“cçê=óçìê=ë~ÑÉíó ÒI=“^ÑíÉê=ïçêâÒ=

çê “`äÉ~åáåÖ=~åÇ=ëÉêîáÅáåÖÒK

Fruit press attachment

for pressing e.g. berries, tomatoes, apples,

pears, rosehips (cook rosehips for 1 hour before

pressing). Extracted fruit pulp is especially

suitable for making jam.

Fig. 

Preparation as described for mincer

attachment. Note required individual parts

and sequence when assembling the fruit

press attachment.

First undo the fastening screw as far as is

required to allow the pulp to flow out while

still moist.

Then adjust the fastening screw until the

pulp flows out with the required moisture.

Place the food to be processed in the filling

tray.

Use the pusher to push in ingredients.

Set rotary knob to setting 7 (4).

Viennese whirl attachment

for shaping biscuit dough or short pastry.

Fig. 

Preparation as described for mincer

attachment. Note required individual parts

and sequence when assembling the biscuit

attachment.

Place the dough to be processed in the

filling tray. Use the pusher to push in

ingredients.

Turn rotary switch to setting 4 (2) or 5 (3)

depending on dough consistency.

Separate the shaped dough coming out

of the appliance with a pastry cutter.

Briefly switch off the food processor

if the dough comes out too quickly.

Grater attachment

for grating almonds, nuts and dried bread

or bread rolls.

t~êåáåÖ>

mêçÅÉëë=çåäó=Çêó=åìíë=~åÇ=~äãçåÇë=áå=ëã~ää=

èì~åíáíáÉë>

Fig. 

Preparation as described for mincer

attachment. Note required individual parts

and sequence when assembling the grating

attachment.

Place the food to be processed in the filling

tray.

Use the pusher to push in ingredients.

Turn rotary switch to setting 3 (2) or 4 (3)

depending on hardness of the food.

Subject to alterations.

MUZ5FW1_alle.book Seite 6 Donnerstag, 25. September 2014 10:16 10

e n

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MUZ5BS1 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch MUZ5BS1 Manual

Product: