526413

Bosch MUMXL40G Manual

22
Zoom out
Zoom in
Previous page
1/132
Next page
22 Robert Bosch Hausgeräte GmbH
Set the whisk to the optimum height
by rotating the whisk:
– Turn clockwise: Raise
– Turn anti-clockwise: Lower
Press release button and move
multi-function arm to position 2.
Check the height of the whisk and,
if required, correct.
When the height has been set
correctly, press the release button
and move the multi-function arm
to position 1.
Hold whisk in place and tighten nut
anti-clockwise using enclosed key.
Working with the bowl
and the tools Fig.
Press release button and move
multi-function arm to position 1.
Cover unused drives with drive covers.
Insert the bowl:
– Tilt the bowl forwards and then
set it down.
– Turn anti-clockwise until it locks into
place.
Depending on the processing task, insert
the stirrer, whisk or kneading hook until
it locks into position.
Note:
If using the kneading hook, first insert
dough deflector, then the kneading hook
(Fig. –4b).
Note shape and position of the parts.
Put the ingredients to be processed into
the bowl.
Press release button and move
multi-function arm to position 2.
Attach the cover.
Insert the mains plug.
Set the rotary switch to the desired setting.
Our recommendation:
– Stirrer:
First mix at setting 1–2, then setting
3–7 as required
– Whisk:
setting 7, mix in at setting 1
– Kneading hook:
first stir in at setting 1, knead at setting 3
Adding more ingredients
Switch off the appliance with the rotary
switch.
Attach funnel.
Top up ingredients through the funnel.
or
Remove lid.
Press release button and move multi-
function arm to position 1.
Add ingredients.
After using the appliance
Switch off the appliance with the rotary
switch.
Remove mains plug.
Remove lid.
Press release button and move
multi-function arm to position 1.
Take the tool out of the drive.
Remove the bowl.
Clean all parts, see “Cleaning and
servicing”.
Blender
Warning!
Operate the blender in the indicated
operating position only.
Operate the assembled blender only and with
the lid attached. Lid must be locked correctly.
Do not operate blender when empty.
Preparation Fig.
Warning!
Never assemble the blender without the seal
on the blender holder.
Putting the blender together:
Insert blender holder with seal into
the blender jug, ensuring that the line
is under the arrow.
Attach blender holder by rotating it as far
as possible to the right.
en
Risk of injury from sharp
blades/rotating drive!
Never place fingers in the attached
blender! Do not remove/attach the
blender until the drive is at a standstill!
Do not switch on the appliance until the
blender has been screwed in all the way
and the tool drive cover (7) has been
attached.
Risk of scalding!
If processing hot liquids, steam escapes
through the funnel in the lid. Add a max.
0,75 litres of hot or frothing liquid.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch MUMXL40G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MUMXL40G in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 24,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info