526401

Bosch MUMXL Manual

24
Zoom out
Zoom in
Previous page
1/132
Next page
24 Robert Bosch Hausgeräte GmbH
Tip: After processing liquids, it is often suffi-
cient to clean the blender without removing
it from the appliance. Pour a little water and
washing-up liquid into the attached blender.
Switch on the blender for several seconds
(setting M). Pour out the water and rinse
out the blender with clear water.
Troubleshooting
The multi-function arm must be engaged
in each operating position.
Initially try to eliminate the problem which
has occurred with the help of the following
information.
Fault
Appliance does not start.
Remedial action
Check the power supply.
Check the mains plug.
Check multi-function arm.
Correct position? Engaged?
Screw on bowl all the way.
Attach drive cover to unused drives.
The safety lock is active.
Switch appliance to 0/off and then back
to the required setting.
Fault
Appliance switches off during use.
The overload protection feature has been
activated. Too much food was processed
at one time.
Remedial action
Switch off the appliance and pull out the
mains plug.
Leave the appliance to cool down
for 15 minutes in order to deactivate
the overload protection.
Reduce processing quantity.
Do not exceed permitted maximum
quantities (see “Application examples”).
Switch on appliance again.
If the motor still does not start, leave
the appliance to cool down for a longer
period (at least 1 hour).
Fault
While the drive was running, the release
button was inadvertently pressed.
The multi-function arm moves up.
The drive switches off, but does not stop
in the tool change position.
Remedial action
Set the rotary switch to 0/off.
Move multi-function arm to posi-
tion 2.
Switch on appliance (setting 1).
Switch off appliance again.
Tool stops in tool change position.
Fault
Blender does not start working or stops
during use, the drive is “humming”.
Blade is blocked.
Remedial action
Switch off the appliance and pull
out the mains plug.
Detach the blender and remove
the obstruction.
Re-attach the blender.
Switch on the appliance.
Application examples
Whipped cream
200 g–1500 g
Whip cream with the whisk for
1½ to 4 minutes at setting 7
(depending on the quantity and
properties of the cream).
Follow instructions in the section
“Important information for using the
whisk” for adjusting the appliance
to the amounts to be processed!
Egg white
2 to 12 egg whites
Beat egg white with the whisk
for 2 to 6 minutes at setting 7.
Follow instructions in the section
“Important information for using the
whisk” for adjusting the appliance
to the amounts to be processed!
en
Risk of injury!
Before eliminating a fault, pull out the
mains plug.
Important information
If the fault cannot be eliminated, please
contact customer service.
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch MUMXL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MUMXL in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 24,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info