698436
32
Zoom out
Zoom in
Previous page
1/196
Next page
32
en Using the time and timer function
2. Press the release button and raise
the swivel arm to the stop.
3. Add the ingredients directly to the bowl.
Press the release button and push the
swivel arm down until it locks into place.
“OptiMUM” appears on the display.
Continue processing your ingredients.
Using the time and
timer function
The appliance features a time and timer
function. The following functions are
available:
“TIME” function
Display of the elapsed processing duration
(standard setting). The “TIME” function
starts automatically once the processing of
food has been started.
Notes:
Press button A briefly during processing
to switch on the “TIMER” function.
Hold button A down during processing
to reset the display to “00:00”.
“TIMER” function
Setting of a required duration. Once the
duration has elapsed, an acoustic signal
will sound and processing will stop.
The function may also be used without
processing food (e.g. for boiling or resting
times of food).
X Image sequence I
1.
Prepare the appliance. Add ingredients.
2. Plug the mains plug into the mains.
“OptiMUM” appears on the display.
3. Press button A. “00:00” appears on the
display.
4. Set the required processing duration using
button + or -. The values will change
faster if the respective button is pressed
and held down. The set processing
duration will remain saved for approx. 5
minutes.
5.
Set the rotary switch to the required setting.
6. The remaining duration will be shown
on the display and the countdown will
continue.
7. Once the remaining duration has
elapsed, an acoustic signal will sound
and the appliance will stop processing
automatically. “FINISH TIMER” appears on
the display.
Note: Setting the acoustic signal
X “Settings” see page 30
8. “TURN
ROTARY SWITCH TO 0” appears on
the display.
9. Turn the rotary switch to y.
“OptiMUM” appears on the display.
10. Disconnect the mains plug.
11. Processing with the “TIMER” function is
ended.
12. Clean all parts immediately after use.
X “Cleaning and maintenance” see
page 36
Notes:
The duration is indicated on the display
in minutes and seconds. Example:
1 minute and 30 seconds: “01:30”. If the
duration is 60 minutes or more, hours
are also displayed: “1:01:30”.
Press button + or - at any time to adjust
the displayed remaining duration.
Press button A briefly twice to stop the
timer (the appliance will continue to run) or
to start it again.
Turn the rotary switch to E to interrupt
processing. The remaining duration
remains saved and the countdown will
continue after the appliance is switched on
again.
Hold down button A to switch the timer off.
“00:00” appears on the display. The “TIME”
function has been activated again.
Using the timer without processing food:
Press button A. “00:00” appears on the
display.
Set the required processing duration using
button + or -.
Press button A briefly twice to start the
timer.
The remaining duration will be shown
on the display and the countdown will
continue.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch MUM9YT5S24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MUM9YT5S24 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 5,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info