698438
40
Zoom out
Zoom in
Previous page
1/196
Next page
40
en Troubleshooting
Problem Possible cause Remedy
The scales do not
show any change in
weight even though
ingredients are being
added.
The quantity of
added ingredients
is less than 5 grams
(0.01 lb).
Add at least 5 grams (0.01 lb), otherwise
the scales will not provide correct
measurement results.
The appliance does
not start the selected
SensorControl Plus
program and switches
off again.
The rotary switch
was not held down
for long enough in
the position ü.
SensorControl Plus
cannot be started.
ADD INGREDIENTS”
appears even though
the ingredients have
already been added.
Models with scales:
ingredients were
added before
the scales were
activated.
Empty the bowl.
Select programme again.
Do not add ingredients until the program
has been selected and the scales
indicate “0g” or “0.00lb” (depending on
setting) or ADD INGREDIENTS” appears
on the display.
Display Possible cause Remedy
ERROR
MOTOR OVERLOAD
Too much food has been
processed either at the
same time or for too
long a period.
Turn the rotary switch to y. Disconnect
the mains plug.
Reduce the processing quantity.
Allow the appliance to cool down to
room temperature.
The appliance or one
of the accessories is
blocked.
Turn the rotary switch to y. Disconnect
the mains plug.
Check appliance/accessories and rectify
the blockage.
Motor defective. If the message appears continuously, the
motor may be defective. Please contact the
customer service.
ERROR
SCALE
The scales do not work
properly.
To reset the scales, hold down one of
the function buttons (D/A/C) until
“OptiMUM” appears on the display.
Turn the rotary switch to y. Disconnect
the mains plug.
Try again after approx. 30 min.
Scales defective If the message appears continuously, the
scales may be defective. Please contact the
customer service.
The scale is exposed to
vibrations.
Do not use the appliance on worktops when
e.g. a dishwasher is running underneath.
The appliance has been
slid on the work surface
before using the scales.
Lift the appliance and set down again.
Reset the scales and try again.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch MUM9Y43S00 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MUM9Y43S00 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 5,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info