698438
30
Zoom out
Zoom in
Previous page
1/196
Next page
30
en Preparation
Preparation
Place the base unit on a smooth, clean
and stable surface.
Pull the power cord out to the required
length.
Press the release button and raise
the swivel arm to the stop.
Place the cover with the filling shaft at
the front on the main drive.
Insert the bowl. When doing so, use the
recesses on the base unit.
Turn the bowl anticlockwise until it locks
into place.
The base unit is prepared for further use.
Important: Do not slide the appliance about
on the work surface as this may impair
the functioning of the scales. To move the
appliance, lift it.
Settings
Press the release button and push the
swivel arm down until it locks into place.
Plug the mains plug into the mains.
The appliance is switched on.
“OptiMUM” appears on the display.
Note: If the appliance is not used or
operated within a certain period, the display
will slowly fade and switch to standby
mode. “OptiMUM” will appear once again
when any button is touched.
Press and hold buttons A and + at the
same time until the configuration menu
is opened.
Release buttons A and + again.
Selecting setting
The following settings appear in
sequence each time button A is briefly
pressed:
LANGUAGE
Language in which the display texts are
displayed.
SOUND
Volume of the acoustic signals – setting
in 6 levels from off to loud.
BRIGHTNESS
Brightness of the display – setting in
6 levels from dark to bright.
UNITS (for models with scales)
Unit of display for the scales – grams (g)
or pounds (lb).
Changing and saving settings
The current setting is changed using the
button + or -.
Press and hold buttons A and +
simultaneously until “SETUP SAVED”
briefly appears on the display.
Release buttons A and + again.
The changed settings are saved.
Example: Setting the language
X see also quick reference guide
Press and hold buttons A and + at the
same time until the configuration menu
is opened.
Release buttons A and + again.
Keep pressing button A until the
language selection appears.
LANGUAGE
ENGLISH
Press the button + or - repeatedly
until the desired language is displayed.
Press and hold buttons A and +
simultaneously until “SETUP SAVED”
briefly appears on the display.
SETUP
SAVED
The language selection is shown on the
display.
Release buttons A and + again.
The language selection is saved.
Hold down one of the function buttons
(D/A/C) until “OptiMUM” appears on
the display. The appliance is ready to
use.
Note: If the appliance is switched on
with the rotary switch, the menu is exited
immediately.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch MUM9Y43S00 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MUM9Y43S00 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 5,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info