746499
20
Zoom out
Zoom in
Previous page
1/121
Next page
20
en Use of tools
Recommended speeds
z
For folding in and mixing different
ingredients gently (e.g. folding in
beaten egg whites)
1-2 For stirring and mixing ingredients
3 For kneading heavy dough with the
kneading hook
5-7 For stirring and whipping ingredi-
ents (e.g. whipped cream) with the
professional flexible beating whisk
or the professional stirring whisk
r
Not suitable when using tools.
Re-adjustment of tools
The appliance is factory-set so the profes-
sional stirring whisk almost touches the
bottom of the bowl to ensure that ingre-
dients are mixed together perfectly. If the
tools touch the bottom of the bowl or are too
far from it, the gap can be easily corrected.
X
“Re-adjustment of tools” see page 23
Swivel arm
X Fig. C
The swivel arm is moved up to
insert or to remove a tool or the bowl.
The
swivel arm features an “EasyArm Lift”
function, which supports the upward move-
ment of the swivel arm.
Bowl and lid
X Fig. D
The appliance comes with a special bowl,
which is securely attached to the base unit
through insertion and rotation. The lid is
secured to the swivel arm and opens auto-
matically when the swivel arm is raised.
Inserting and removing tools
X Fig. E
The tools are equipped with eject buttons
on the protective cap which are used to
facilitate removal of the tools.
Insert tool: Insert the tool into the main
drive until it locks into place. The drive is
then covered by the protective cap.
Remove tool: Press both eject buttons
until the tool is released.
Take the tool out
of the drive.
Cable storage
compartment
The appliance is equipped with a
cable storage compartment. The length of
the power cord can be adjusted as required
by pulling it out or pushing it back.
Safety systems
The appliance has various safety systems.
X “Safety systems” see page 24
Use of tools
W Risk of injury!
Do not insert the mains plug until
all preparations for working with the
appliance are complete.
While operating the appliance, never
reach into the bowl or filling shaft.
Do not operate the appliance without
the lid in place.
Always wait for the drive to come to a
standstill before moving the swivel arm
or changing tools.
For safety reasons always fit the
protective drive covers on the front and
rear drive.
Preparation
Place the base unit on a smooth, clean
and stable surface.
Pull the power cord out to the required
length.
Press the release button and raise
the swivel arm to the stop.
Place the lid with the filling shaft at the
front on the main drive.
Insert the bowl. When doing so, use the
recesses on the base unit.
Turn the bowl anticlockwise until it locks
into place.
Important!
The appliance cannot be switched on
unless the bowl has been inserted correctly.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch MUM9A66R00 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MUM9A66R00 in the language / languages: English, German, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 5,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info