774953
24
Zoom out
Zoom in
Previous page
1/108
Next page
en Troubleshooting
24
Fault Cause and troubleshooting
The swivel arm cannot
be opened or closed
because the tool is
jammed in the bowl.
Drive is not in the parked position after a safety sys-
tem has stopped processing or the power supply has
been interrupted.
1. Set the rotary switch to ⁠.
2. Eliminate the problem that caused the appliance to
stop.
→"Safety systems", Page16
3. When the swivel arm is open, remove the tool and
close the swivel arm.
4. Set the rotary switch briefly to and then back to
⁠.
aThe drive remains on for a short time until the
parked position is reached.
Fault Cause and troubleshooting
"5000g" or "11.00lb"
is flashing on the dis-
play.
Display values of the scales have been exceeded.
Observe the display values of the scales.
→"Display values of scales", Page20
"-990g" or "-2.20lb"
is flashing on the dis-
play.
Display values of scales have not been attained.
Observe the display values of the scales.
→"Display values of scales", Page20
"59:59m:s" is flashing
on the display.
Display range of the timer has been exceeded.
Process food for not longer than 59minutes and
59seconds or reset the processing time within this
time.
→"Reading off and resetting the processing time",
Page21
The display shows
"ERROR"
Scales are exposed to excessive vibrations.
Do not use the appliance on worktops exposed to
vibrations, e.g. with a dishwasher running under-
neath.
Base is uneven.
1. Set up the appliance on a stable, level, clean and
flat work surface.
2. Check whether all 4 feet are in contact with the
work surface.
The feet are soiled.
Wipe the feet down with a damp cloth.
The scales have to be restarted.
1. To restart the scales:
Press ⁠.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch MUM5XW40G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MUM5XW40G in the language / languages: English as an attachment in your email.

The manual is 10.04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info