774953
16
Zoom out
Zoom in
Previous page
1/108
Next page
en Familiarising yourself with your appliance
16
Note:The professional beating whisk
is factory-set so that ingredients are
mixed together perfectly.
Correcting tool adjustment
ATTENTION!
The appliance and tools can be dam-
aged if a wrong tool setting is used.
Never operate a tool that touches
the bowl.
Requirements
¡The mains plug is not inserted.
¡The swivel arm is open.
¡The professional beating whisk is
inserted.
¡The bowl has been inserted.
1. Hold the beating whisk at the bot-
tom with one hand and release the
lock nut clockwise using a spanner
wrench.
→Fig. 4
2. To change the distance, turn the
tool.
→Fig. 5
Observe the values in the table:
Setting Distance
Optimum set-
ting
3mm
One turn clock-
wise
1mm more
One turn anti-
clockwise
1mm less
3. Press the release button and push
the swivel arm down until it en-
gages.
4. Check the setting.
5. Press the release button and raise
the swivel arm until it engages.
6. Hold the beating whisk at the bot-
tom with one hand and tighten the
lock nut anticlockwise using a
spanner wrench.
5.10 Symbols
You can find an overview of the sym-
bols used on your appliance here.
Symbol Description
Marking on the protective
cover for drive2.
Attachment marking on
the protective cover for
drive3.
Position marking on
drive3.
5.11 Parked position
Your appliance is equipped with an
automatic parked position.
After the appliance has switched off,
the drives will continue moving for a
few seconds until the correct parked
position is reached.
Note:The swivel arm will only open
or close with the inserted tool when
the drive is located in the correct
parked position.
The following causes result in an
incorrect parked position:
¡The power supply was interrupted
during processing.
¡A safety system terminated pro-
cessing.
¡During processing the swivel arm
disengaged or the release button
for the swivel arm was pressed.
Tip:You can easily adjust an incor-
rect parking position yourself.
→"Troubleshooting", Page23
5.12 Safety systems
You can find an overview of your ap-
pliance's safety systems here.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch MUM5XW40G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MUM5XW40G in the language / languages: English as an attachment in your email.

The manual is 10.04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info