620105
21
Zoom out
Zoom in
Previous page
1/268
Next page
21
Robert Bosch Hausgeräte GmbH 21
Put the ingredients to be processed into
the bowl.
Press the Release button and move
the swivel arm to position 1.
Attach the cover.
Set the rotary switch to the desired
setting.
Our recommendation:
Stirrer:
first stir in at setting 1 (1), then select
setting 7 (4)
Whisk:
setting 7 (4), mix in at setting 1 (1)
Kneading hook:
first stir in at setting 1 (1), knead at setting
3 (2)
Adding more ingredients
Switch off the appliance with the rotary
switch.
Add more ingredients through the feed
tube in the cover.
or
Remove lid.
Press the Release button and move
the swivel arm to position 2.
Add ingredients.
After using the appliance
Switch off the appliance with the rotary
switch.
Remove mains plug.
Remove lid.
Press the Release button and move
the swivel arm to position 2.
Take the tool out of the drive.
Remove the bowl.
Clean all parts, see “Cleaning and
servicing”.
Continuous-feed shredder
Warning!
The continuous-feed shredder must be
completely assembled before use. Never
assemble the continuous-feed shredder on
the base unit.
Operate the continuous-feed shredder in the
indicated operating position only.
Predetermined breaking point Fig.
The built-in predetermined breaking point
protects the drive of the appliance. If an
overload occurs, the drive shaft of the con-
tinuous-feed shredder breaks. However, the
drive shaft can easily be replaced.
A new disc holder with drive shaft is available
from customer service.
Reversible slicing disc – thick/thin
for slicing fruit and vegetables.
Process at setting 5 (3).
Designation on the reversible slicing disc:
“1” for the thick slicing side
“3“ for the thin slicing side
Warning!
The reversible slicing disc is not suitable for
slicing hard cheese, bread, rolls or chocolate.
Slice boiled, waxy potatoes only when they
are cold.
Reversible shredding disc –
coarse/fine
for shredding vegetables, fruit and cheese,
except for hard cheese (e.g. Parmesan).
Processing at setting 3 (2) or 4 (3).
Designation on the reversible shredding disc:
“2” for the coarse shredding side
“4” for the fine shredding side
Warning!
The reversible shredding disc is not suitable
for shredding nuts. Shred soft cheese with
the coarse side only at setting 7 (4).
Grating disc – medium-fine
for grating raw potatoes, hard cheese
(e.g. Parmesan), cooled chocolate and nuts.
Process at setting 7 (4).
Warning!
The grating disc is not suitable for grating soft
cheese and cheese slices.
Working with the continuous-feed
shredder Fig.
Press the Release button and move
the swivel arm to position 2.
en
Risk of injury
Do not grip the sharp blades or edges of
the cutting discs. Take hold of cutting
discs by the edge only.
Before attaching/removing the continuous-
feed shredder, wait until the drive has
come to a standstill and pull out the mains
plug.
Do not reach into the feed tube.
MUM5xxx_de-ar.book Seite 21 Donnerstag, 25. September 2014 9:59 09
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch MUM54211 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MUM54211 in the language / languages: All languages as an attachment in your email.

The manual is 37,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info