770891
21
Zoom out
Zoom in
Previous page
1/184
Next page
21
Cleaning and servicing en
Blender
X Figure E
W Risk of injury from sharp blades /
rotating drive!
Never place fingers in the attached blender!
Do not remove / attach the blender until
the drive is at a standstill! Operate the
assembled blender only and with the lid
attached.
W Risk of scalding!
If processing hot liquids, steam escapes
through the funnel in the lid. Add a max.
0.5 litres of hot or frothing liquid.
Warning!
Blender may be damaged. Do not process
deep-frozen ingredients (except ice cubes).
Do not operate when empty.
Press the Release button and move the
swivel arm to position 3.
Remove the blender drive cover.
Attach the blender jug (mark on the
base of the blender jug on the mark
on the base unit) and rotate as far as
possible in an anti-clockwise direction.
X Fig. E-4/5
Add ingredients.
Maximum capacity of liquid for plastic
blender = 1 litre,
frothing or hot liquid maximum 0.5 litres.
Optimal processing capacity – solids
= 50-100 g.
Attach lid and press firmly. While
working, always hold the lid firmly with
one hand. However, do not place hand
over the refill opening!
Set the rotary switch to the desired
setting.
Adding more ingredients
X Figure E-6
Switch off the appliance with the rotary
switch.
Remove the cover and add ingredients
or
remove the funnel and gradually add
solid ingredients through the feed tube
or
pour liquid through the funnel.
After using the appliance
Switch off the appliance with the rotary
switch.
Remove mains plug.
Rotate the blender in a clockwise
direction and remove.
Tip: It is recommended to clean the blender
immediately after use.
Cleaning and servicing
Attention!
Do NOT use abrasive cleaning agents.
Surfaces may be damaged.
Cleaning the base unit
W Risk of electric shock!
Never immerse the base unit in water or
place under running water.
Remove mains plug.
Wipe the base unit with a damp cloth.
If required, use a little detergent.
Then dry the base unit.
Cleaning the bowl and
accessories
All parts are dishwasher-safe. Do not
wedge plastic parts in the dishwasher as
they could warp.
Cleaning the blender
W Risk of injury from sharp blades!
Do not touch blender blades with bare
hands. The blender can be disassembled
for cleaning.
Warning!
Do NOT use abrasive cleaning agents. The
blade insert is not dishwasher-safe. Clean
the blade insert under running water only.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch MUM44R2A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MUM44R2A in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 4.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch MUM44R2A

Bosch MUM44R2A User Manual - English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info