Manual Bosch MUM 7400 (page 8 of 12) (English)

70799

Zoom out

Zoom in

1/12

depressing the “-” button after first

selecting the timer function. The

time could then be adjusted down

from 30 minutes by depressing the

“-” button.

Using the Rotary Switch

Once the attachment is in place, the

speed of its moving components can

be controlled through the use of the

rotary switch at the front of the power

unit. See figure 2a. The rotary switch

has six positions:

a. “M,” a momentary “pulse” position

that provides full speed and power

for the time it is held in position.

b. “O/Off,” the Off position.

c. Four speeds labeled 1, 2, 3 and 4.

Speed 1 is the lowest speed. The

speed increases with each

succeeding step up to the highest

speed, speed 4. The selected

speed is also indicated by the bar

at the top of the digital display, see

figure 2c, 1. The bar is broken into

four separate segments. For Speed

1 a single segment is illuminated,

for Speed 2 two segments are

illuminated. This continues until

Speed 4 when all four segments at

the top of the display are

illuminated.

Timer with Rotary Switch

If the timer function had been turned

on prior to switching the power unit on

and setting the speed with the rotary

switch, the power unit will run for the

time selected and then turn itself off.

The digital display will show “00:00”

and the colon between the minutes and

seconds, as well as the four speed

segments, will flash. The rotary switch

should then be turned to the Off

position, “O/Off.” The timer will

automatically turn itself off.

Interrupting or Pausing Timer

The timer function may be interrupted

or paused at anytime by turning the

rotary switch to the Off position, “O/

Off.” The operating time will stop at

the current time. To restart simply turn

the rotary switch back on to the

desired speed. The appliance will then

continue to operate for the remaining

time or until again interrupted.

Stopping Timer Function

The timer function can be turned off at

any time by depressing the “time off”

button, see figure 2b. If the rotary

switch is On, the power unit will

continue to run at the selected speed

until turned off manually.

Electronic Safety Control

The Bosch Concept 7400 Kitchen

Machine incorporates an electronic

safety control to protect the motor. If

the safety becomes activated, the

power unit will shutoff and an error

code will be displayed, see figure 2c,

3. See TROUBLESHOOTING at the

back of this manual if the electronic

safety control should become

activated.

6. Turn power unit off.

When your work with the attachment

is completed or the capacity of the

batch-feed attachment has been

reached, turn the power unit to the Off

position, “O/Off.” If you are using the

timer function, turning the rotary

switch to Off will stop the timer at the

amount of time remaining.

7. Remove the attachment.

Remove the attachment from the

power unit, per instructions for the

specific attachment being used.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MUM 7400 in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch MUM 7400 Manual

Product: