11
Figure 6.
3. There are two styles of dough hook
used with the Bosch Machine, the
standard and the professional, but no
matter which one you have they are
mounted in the mixing bowl in the same
way: engage the dough hook on the
driveshaft of the mixing bowl by placing
it over the center column, as shown in
figure 7. Once in place, check to make
sure dough hook has engaged the
driveshaft by turning the dough hook
clockwise while pushing down until it
stops.
Figure 7.
4. Place the anti-splash cover on the bowl
so that the tabs on the bowl fit into the
recesses in the bowl cover and turn the
cover counterclockwise to fasten the
bowl cover to the bowl. See figure 8a.
The cover has an integral filling funnel
with a cap. The funnel cap may be
removed to add ingredients (see figure
8b), but the cover and cap should be in
place whenever the power unit is in
operation. The anti-splash cover and
cap serve to prevent the escape of flour
dust at the beginning of the stirring and
kneading process and also serves to
prevent accidental contact with the
moving dough hook.
Figure 8.
Placing into Operation w/Dough Hook
Make sure that the power unit is on a
smooth, clean, suitable work surface and
switched to off position, “O/Off.” Unwind the
electrical cord to the necessary length and
plug into a convenient outlet. The mixing
bowl with dough hook is now ready for
operation. See table 1 for examples
demonstrating the use of dough hook
attachment. Sample recipes may also be
found in recipes section, at the back of this
manual.
How to Use Twin Beating Whisks
All Bosch Concept Series Kitchen
Machines come with a twin beating whisk
assembly, see figure 4c.
The twin beating whisks and mixing bowl
are intended to be used for very light
substances, such as cream, egg whites,
sauces, batters and light pastry doughs
that are thin enough to pour.
Plastic Bowl Stainless Steel Bowl
Standard Professional
Dough Hook Dough Hook
a. b.
