774911
9
Zoom out
Zoom in
Previous page
1/134
Next page
9
en
Control panel
Control panel
The control panel consists of controls
(buttons) and indicators (LEDs). The
buttons can be used to select the individual
preparation programmes and adopt the
different setting options (e.g. to select
steam pressure function, preparation
temperature / time). The settings are
indicated via the illuminated LEDs and/or
the display.
Controls
X Fig. C
B Standby
Switches from standby mode to
function selection mode and back
again.
A Set the start time delay
The start time delay can be set for
the selected preparation programme.
D Select a preparation programme
from the list (h)
The individual preparation
programmes are displayed one
after another by repeatedly pressing
button D. The corresponding LED
lights up in the control panel.
E Adjust the preparation time
The pre-configured preparation
time [ medium ] for a preparation
programme can be shortened
[ short ] or lengthened [ long ]. The
corresponding indicator (g) lights up.
The corresponding pre-configured
preparation time is shown in the
display (a).
F Set a customised preparation time
For customised adjustment of the
preparation time.
C Set a customised preparation
temperature
For customised adjustment of
the preparation temperature. For
preparation programmes with
enabled steam pressure function, the
temperature is pre-configured (f) and
cannot be adjusted individually.
L Steam pressure function
The steam pressure functions
“low steam pressure” [ K ] or
“high steam pressure” [ L ] are
selected by pressing button L. The
respective indicators (f) light up.
X “Preparation with steam pressure”
see page 16
G Confirm the programme
Pressing button G starts the
selected preparation programme.
H Delete a setting or abort the
programme
Pressing button H deletes the
settings or stops a programme that
was previously started.
Indicators
X Fig. C
a Display
Display of the remaining time or the
temperature.
b Timer
Indicates that the start time delay is
enabled. The display (a) shows the time
until the start of the selected preparation
programme.
c Preparation steps /
programme progress
Display of the individual preparation
steps and the programme progress.
In the case of multiple preparation steps
(e.g. the ingredients are added after
heating the soft frying oil), these are
visually indicated by the illumination of
LEDs 1, 2, 3 or 4. An audible signal also
sounds if a subsequent preparation step
is required.
d finished
This indicates that the meal is ready.
The display (a) flashes and shows
“00:00”. An audible signal also sounds.
e keep warm
Indicates that the keep warm function is
switched on at the end of a preparation
programme. A rectangle lights up in the
display (dotted line).
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch MUC88B68GB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MUC88B68GB in the language / languages: English as an attachment in your email.

The manual is 3.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info