774963
6
Zoom out
Zoom in
Previous page
1/38
Next page
6
en Operation
Operation
W Risk of scalding!
Take care when processing hot food. Hot
food may splash during processing. Leave
boiling food to cool down to 80 °C or less
before processing.
W Risk of injury!
After switching off the appliance, wait for the
blade in the blender foot to come to a stand-
still. Never grip the blade in the blender foot.
Caution!
The blender foot must be securely
connected to the base unit. The blender
foot must not wobble or fall off.
Solid foods such as apples, potatoes
and meat always must be cut up and
cooked until soft before processing. Use
the universal cutter for cutting/chopping
raw food (onions, garlic, herbs, etc.).
The bottom of the receptacle you use
must not have any bumps or steps in it.
X Image sequence B
1. Place the prepared food in the blender
jug or another suitable receptacle or
process in the pan used for cooking.
2. Completely unwind the power cord.
3. Hold the base unit securely, fit the
blender foot onto the base unit and
press until it clicks into position.
4. Set the desired speed with the speed
control dial. Plug the mains plug into the
mains.
5. Hold the receptacle with one hand and
immerse the blender foot.
W Risk of electric shock!
Only immerse the blender foot into the food
as far as the marking Í or there will be
a risk of electric shock!
6. To start processing with the preselected
speed, press the On button Ã.
7. To start processing with the highest
speed, press the Turbo button Ã.
Caution!
Never press the On button à and the
Turbo button  at the same time.
On button Ã
For using the appliance at the preselected
speed. The appliance will continue to run as
long as the button is pressed.
Turbo button Â
For using the appliance at the maximum
speed. The appliance will continue to run as
long as the button is pressed.
Note: The speed setting has no influence
on use of the Turbo button Â.
Caution!
Never press the On button à and the
Turbo button  at the same time.
Recommended speeds
●-8 For mixing liquids and hot food and
for mixing in
8-12 For mixing and pureeing fruit or
cooked vegetables
ÂFor making mayonnaise
Use with: universal cutter (L / XL),
masher attachment, whisk
Release buttons
To remove the blender foot or other
accessories, press both release buttons
simultaneously.
Stainless steel blender foot
The blender foot is suitable for cutting
and mixing mayonnaise, sauces, blended
drinks, baby food, cooked fruit and cooked
vegetables, and for pureeing soups.
Accessories
If an accessory is not included with the
hand blender, it can be ordered from
customer service:
Accessories Order no.
Universal cutter L 12019196
Universal cutter XL 12019197
Whisk 12019198
“ProPuree” masher attachment 12017506
Multifunction accessory
(CNHR32)
11020079
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch MSM6S90BGB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MSM6S90BGB in the language / languages: English as an attachment in your email.

The manual is 1.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info