779214
7
Zoom out
Zoom in
Previous page
1/60
Next page
7
en
Universal cutter
After using the appliance
8. Disconnect the mains plug.
9. Hold down both release buttons and
remove the base unit.
10. Rotate the gear attachment
anticlockwise and remove.
11. Take hold of the blade by the plastic
handle and take out.
12. Empty the container.
Clean all parts immediately after use.
X Fig. D
Cleaning
W Risk of injury
Do not touch the blades of the universal
cutter / ice crusher with bare hands. To
clean, only grasp by the plastic and use a
brush.
Warning!
Never immerse the gear attachment in
liquids and do not clean under running
water or in the dishwasher.
Wipe the attachment with a damp cloth
only.
Clean the other accessory parts with a
detergent solution and a soft cloth or
sponge or place them in the dishwasher.
Clean the blades with a brush.
Sample recipe:
Honey cake with apples
Honey-apple mixture (CNHR24):
110 g forest honey (5 °C)
30 g apple in cubes (11 mm)
Put in universal cutter and mix on Turbo
speed for 2 seconds.
Honey-apple mixture
(CNHR25, CNHR26, CNHR26C):
130 g forest honey (5 °C)
30 g apple in cubes (11 mm)
Put in universal cutter and mix on Turbo
speed for 2 seconds.
Operation
Warning!
Always observe the maximum quantities
and processing times in the table. X Fig. E
Blade: For cutting meat, hard cheese,
onions, herbs, garlic, fruit, vegetables, nuts
and almonds.
Ice crusher blade: For crushing ice cubes
(crushed ice). Optimum processing quantity:
4-6 ice cubes (max. 100 g).
Warning!
The universal cutter must be completely
assembled before use!
Before cutting meat, remove gristle,
bones and sinews.
The universal cutter is not suitable for
cutting very hard items (coffee beans,
radishes, nutmeg) and frozen food
(fruit, etc.).
Ice cubes should be processed only with
the ice crusher blade.
X Fig. B
1. Place the container on a smooth, clean
work surface and press into position.
Insert the universal blade or ice crusher
blade.
Important: The blade must be positioned
straight in the container.
2. Add food.
3. Place the gear attachment on the
container and rotate clockwise until it
clicks into position.
4. Place the base unit on the gear attach-
ment and press until it clicks into position.
5. Plug the mains plug into the mains.
6. Hold the base unit and universal cutter
firmly. Press the Turbo button Â.
The appliance remains switched on as
long as the button is pressed.
7. Release the On button after processing.
Wait until the drive comes to a standstill.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch MSM67120B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MSM67120B in the language / languages: All languages as an attachment in your email.

The manual is 1.68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info