700711

Bosch MSM6 Manual

7
Zoom out
Zoom in
Previous page
1/71
Next page
Robert Bosch Hausgeräte GmbH 7
en
Operation
Universal cutter with blade
The universal cutter with cutter blade is suitable
for cutting meat, hard cheese, onions, herbs,
garlic, fruit, vegetables, nuts, almonds.
With the universal cutter XL use the appliance
at full power to prepare honey spread
(according to the recipe see
Fig.
).
Always observe the maximum quantities and
processing times in the table (
Fig.
).
Caution!
Before cutting meat, remove gristle, bones and
sinews.
The universal cutter with cutter blades is not
suitable for cutting very hard food (coffee
beans, radishes, nutmeg) and frozen food
(fruit, etc.).
Fig.
– with cutter blade (sizes L and XL)
Fig.
– with ice crusher blade (size L only)
Place the universal cutter on a smooth,
clean work surface and press.
Insert the blade.
Add food.
Warning!
Blade must sit straight in the universal cutter
so that the attachment sits correctly
(Fig.
=
/
-3).
Place the attachment on the universal
cutter and rotate in a clockwise direction
until it “clicks” into position.
Place the base unit on the attachment and
lock into position.
Insert the mains plug.
Hold the base unit and universal cutter
firmly and switch on the appliance (turbo
speed).
Release the On button after processing.
After using the appliance
Remove mains plug.
Press the release buttons and remove the
base unit from the attachment.
Rotate the attachment in an anti-clockwise
direction and remove from the universal
cutter.
Take hold of the blade by the plastic handle
and take out.
Place the lid on the universal cutter to keep
in the processed ingredients.
Universal cutter with Vario set (only size
XL)
The universal cutter with Vario set is suitable
for cutting hard, dry food (e.g. chocolate, nuts,
almonds, Parmesan) or for crushing ice cubes
into small (
S
), medium (
M
) or large (
L
) pieces.
The size is specified by positioning the marks
S
,
M
or
L
on the Vario filter insert when
inserting it into the Vario holder.
Information and recommendations concerning
settings, quantities and processing times can
be found in the table (Fig.
).
Fig.
Place the universal cutter on a smooth,
clean work surface and press.
Insert Vario holder into the universal cutter.
Pegs on the universal cutter must be
located in the grooves of the holder.
Place Vario filter insert on the universal
cutter.
The marks (S/M/L) must be positioned
above the peg of the universal cutter
according to the required degree of
cutting (Fig.
-2).
Insert Vario blade.
Add food.
Warning!
Vario blade must sit straight in the Vario filter
insert so that the attachment sits correctly
(Fig.
-3a).
Place attachment on the Vario filter insert
and turn clockwise until it clicks into
position.
Place the base unit on the attachment and
lock into position.
Insert the mains plug.
Hold the base unit and universal cutter
firmly and switch on the appliance (turbo
speed).
Release the On button after processing.
The blade is sharp and can cause
injury!
The universal cutter must be completely
assembled before use!
Never grip the blade in the universal cutter.
Take hold of the universal cutter blade by
the plastic handle only.
Do not touch blade with bare hands.
Clean them with a brush.
MSM6_Zubehör 1 mit VarioChopper_alle.book Seite 7 Mittwoch, 18. Februar 2015 7:29 07
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch MSM6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MSM6 in the language / languages: All languages as an attachment in your email.

The manual is 7,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info