773057
21
Zoom out
Zoom in
Previous page
1/236
Next page
21
en
Preparation
Lid with vacuum seal
For an air-tight seal on the blender jug,
ToGo bottle and storage containers. To
remove a lid with vacuum applied, first
grip the vacuum seal at one end and pull
it up. Sufficient air has to get inside for the
lid to be removed. The lids of the storage
containers are equipped with a date
indicator. Turn the two rings to set the day
and month when the food was added.
Safety systems
The appliance has various safety systems.
X
Preparation
W Risk of injury
Do not reach into the blender knife. Grip
the blade insert by the plastic only.
Do not insert the mains plug until
all preparations for working with the
appliance are complete and the blender
jug has been correctly positioned on the
base unit.
Warning!
When the blender is assembled, do not lift
it by the handle of the blender jug. To lift
the blender, always grip it by the base unit/
motor block.
X Image sequence B
1. Unwind the power cord to the required
length.
Important: Make sure that the power cord
runs through the cable opening on the
underside of the appliance.
2. Place the base unit on a stable and level
work surface. Open the cap completely.
3. Turn the blender jug upside down and fit
the blade insert with the sealing ring in it
as shown.
4. Fit the lid of the blender jug onto the
blade insert.
5. Rotate the blade insert clockwise to the
stop with the help of the lid.
6. Remove the lid.
Important: The recesses on the blade
insert must be aligned with those on the
blender jug.
7. Turn the blender jug up the right way
and position on the drive as shown.
Marking pointing to .
8. Rotate the blender jug clockwise to the
stop. Marking pointing to .
9. Prepare the food and add to the blender
jug. Do not exceed the marking .
Note: Always blend food with sufficient
liquid as this will produce a better result.
When adding ingredients liable to froth up
such as milk and dairy products, do not
exceed the marking .
10. Fit the lid and press on firmly. Observe
the recess on the handle when doing so.
Note: The lid can only be fitted in this
position.
11. Close the cap and press down to the
stop.
12. Insert the mains plug.
Note: The blender can only be used if the
following conditions are met.
The blade insert and lid must be
properly connected to the blender jug.
The blender jug must be properly
connected to the base unit.
The cap must be completely closed.
Use
Note: Table K shows further examples
of application. The preparation can be
carried out with an automatic programme or
manually in single steps (1, 2, 3).
Usage informations:
This appliance is not suitable for making
mayonnaise.
This appliance is not suitable for
cutting and chopping semi-solid or
solid food (parsley, onion, meat, nuts,
parmesan cheese), but could be used in
combination with liquids. X Table K
This appliance is not suitable for
making nuts spreads (hazelnut cream,
nutella, …).
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch MMBV622M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MMBV622M in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info