700733
27
Zoom out
Zoom in
Previous page
1/236
Next page
27
en
Troubleshooting
Troubleshooting
In the following table you will find solutions for problems or faults which you can easily
rectify yourself. If a fault cannot be eliminated, please contact customer service.
Problem Possible cause Remedial action
Appliance fails to
start up or switches
off while in use. The
symbol lights up.
Blender jug is not
correctly positioned
or has become
detached.
Fit the blender jug and lid properly.
The cap is not closed
properly.
Press cap right down.
Vacuum pump is
running but the
preset vacuum level
is not reached. The
symbol lights up
and 2 short signal
tones sound.
Lid or vacuum seal is
soiled or damaged.
Switch off the appliance.
Check lid, vacuum seal and seal of
blade insert for damage.
Clean and dry thoroughly and then
replace.
Rotate the blade insert in the blender
jug to the stop. Observe the marking.
Fit the lid correctly and press on firmly.
Observe the recess on the handle when
doing so.
Press cap right down.
Switch on the appliance and try again.
Lid is not fitted
properly / completely.
The cap is not closed
properly.
Seal of blade
insert is soiled or
damaged.
Blade insert is not
fitted properly /
completely.
Vacuum pump not
running or switches
off while in use. The
symbol lights up.
Moisture in vacuum
unit
Remove vacuum valve. Clean and dry the
vacuum valve and cap thoroughly.
Max. capacity
exceeded
Depending on the ingredients, do not fill
beyond the relevant
marking on the
blender jug when filling.
Appliance fails to
start up or switches
off while in use.
The overload
protection device is
activated.
Set the rotary selector to 0. Wait until
the appliance comes to a standstill.
Switch off the appliance using
button.
Disconnect the mains plug.
Let the appliance cool down for approx.
15-20 minutes and then switch it on
again.
If the appliance still does not start, leave
the appliance to cool down further and
try it again later.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch MMBV6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MMBV6 in the language / languages: All languages as an attachment in your email.

The manual is 8,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info