765441
33
Zoom out
Zoom in
Previous page
1/316
Next page
Before using for the first time en
33
You can switch on and operate the
appliance once the blender jug has
been correctly positioned and the lid
is locked.
Overload protection
The overload protection system pre-
vents the motor and other compon-
ents from being damaged through
being overloaded.
Before using for the first time
Before using for the
first time
Before using for the first time
Configure the basic settings. Clean
the appliance and accessories.
Cleaning the appliance and
parts
1. Clean all parts that come into con-
tact with food before using for the
first time.
→"Cleaning and servicing",
Page36
2. Put the cleaned and dried parts
out ready for use.
Basic operation
Basic operation
Basic operation
Cable length
Adjust the length of the power cable
to your needs.
Adjusting cable length via cable
storage compartment
1. Pull the power cable out to the re-
quired length.
2. To shorten the cable, push it into
the cable storage compartment.
Recommended speeds
You can find out here which speeds
you can use to achieve optimal res-
ults.
Setting Use
Briefly blending food with in-
stantaneous switching at max-
imum speed.
Blending, puréeing, emulsifying,
frothing and cutting up food.
Blending food that should not
be cut up too small.
Tip:Please use our recipe sugges-
tions to gain experience with your
new appliance.
→"Overview of recipes", Page37
Using the blender to process
food
WARNING
Risk of injury!
Improper use may cause injuries.
Only use the appliance once it is
fully assembled.
1. Prepare the food.
For example, cut up large items of
food.
2. Turn the blender jug upside down.
3. Open the retaining bracket.
→Fig. 3
4. Align the EasyClick blade insert
with the tap in the blender jug.
5. Push the EasyClick blade insert
into the blender jug and close the
retaining bracket until it clicks into
place.
→Fig. 3
6. Set the rotary switch to ⁠.
7. Place the blender jug onto the
base unit and rotate in a clockwise
direction until it locks into place.
→Fig. 4
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch MMB6384M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MMB6384M in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 26,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info