765456
16
Zoom out
Zoom in
Previous page
1/178
Next page
16
Cleaning and servicing
en
After using the appliance
Set the rotary switch to P.
Remove mains plug.
Remove the blender jug by rotating it in
an anti-clockwise direction.
Take the lid off the blender jug.
Empty blender jug.
Turn blender jug over and put down with
the opening face down.
Remove blade holder. To do this, fold the
handle upwards and pull out the blade
holder.
Clean all parts, see “Cleaning and
servicing”.
Working with the smoothie insert
With this insert it is particularly easy to make
smoothies made of fresh fruits, milk, soya
milk, yoghurt and juices.
Fig. D
Prepare blender as described above.
After attaching and screwing on the
blender jug, the smoothie insert is
inserted into the blender jug.
Put lid on and press down all the way.
Insert the mains plug.
Put ingredients through the feed tube into
the blender jug; chop up fruit beforehand
if required.
Warning!
Do not put large, hard ingredients in the
blender jug, e.g. stones from avocados or
plums.
Insert measuring cup into feed tube.
Switch on the appliance.
After using the appliance
Set the rotary switch to P.
Remove mains plug.
Remove the blender jug by rotating it in
an anti-clockwise direction.
Remove lid.
Take measuring cup out of the lid and
plug into the smoothie insert. This
prevents integral components from falling
out of the insert into the drink.
Empty blender jug.
Clean all parts, see “Cleaning and
servicing”.
Cleaning and servicing
The appliance requires no maintenance!
Thorough cleaning guarantees a long
service life. An overview of cleaning the indi-
vidual parts can be found in Fig. E.
W Risk of electric shock!
Never immerse the motor block in water and
never hold under running water and do not
clean in the dishwasher.
Warning!
Do not use abrasive cleaning agents.
Surfaces may be damaged.
Tips:
Preferably clean the parts immediately
after use. This will prevent residue from
drying on and attacking the plastic
(e.g. by essential oils in herbs).
If processing e.g. carrots and red
cabbage, the plastic parts will become
discoloured by a red film which can be
removed with a few drops of cooking oil.
Cleaning the motor block
Remove mains plug.
Wipe motor block with a damp cloth.
If required, use a little detergent.
Then wipe dry.
Cleaning the blender
The blender jug, lid and measuring cup are
dishwasher-safe.
Tip: Pour a little water and washing-up liquid
into the attached blender. Switch to setting
Q for several seconds. Pour out the
water and rinse the blender with clean water.
Cleaning blade holder
(only MMB42...)
W Risk of injury from sharp blades!
Do not touch blender blades with bare
hands. Clean them with a brush.
Do not clean blade holder in the dishwasher,
but under running water using a brush. Do
not leave in water! Remove seal for cleaning.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch MMB21P1W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MMB21P1W in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 5,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info