700773
18
Zoom out
Zoom in
Previous page
1/210
Next page
18
en 
Before using for the first time
Before the new appliance can be used,
it must be fully unpacked, cleaned and
checked.
Caution!
Never operate a damaged appliance!
Remove the base unit and all
accessories from the packaging.
Remove the packaging material that is
present.
Dismantle any assembled parts into
their individual parts. Do this in reverse
order, as described under „Preparation“.
Check all parts for completeness.
X Fig. A
Inspect all parts for visible damage.
Thoroughly clean and dry all parts
before using for the first time.
X

Control and display
elements
Button k
Press button k to switch on the appliance.
The drive will start up at once. Press button
k again to switch off the appliance. The
drive stops.
Release button
Press the release button to unlock an
attachment fitted on the appliance. Only
when the release button is pressed is it
possible to turn the attachment clockwise
and remove it from the base unit.
Safety devices
Overload protection
(thermal circuit breaker)
If the motor switches itself off while the
appliance is being used, the overload
protection feature has been activated.
Possible causes may be the simultaneous
processing of large quantities of food or a
blockage caused by bones.
X
Base unit
Preparation
W Risk of injury!
Do not insert the mains plug until all
preparations for working with the appliance
are complete and the required attachments
are assembled correctly and connected to
the base unit.
Place the base unit on a stable and level
work surface.
The base unit is now prepared.
Base attachment
The base attachment can be used for the
following applications:
Meat mincer
For mincing raw or cooked food. Select the
appropriate perforated disc depending on
the type and consistency of the food to be
processed. X
Sausage filler
For filling artificial and natural casings with
sausage meat. For producing meat rolls.
Kebbe maker
For producing tubes of dough or minced meat.
Note: Other applications are possible
using the base attachment and appropriate
accessories available from Customer
Service.
Caution!
When assembling the different individual
parts, make sure that the notched markings
on the inserts match up with the relevant
one on the housing.
Preparation for meat mincer
W Risk of injury!
Do not reach into the sharp knife.
Caution!
Always only use one perforated disc.
X Fig. B
1. Insert the worm gear with the agitator
paddle at the front in the housing.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch MFW2520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MFW2520 in the language / languages: All languages as an attachment in your email.

The manual is 6,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info