765451

Bosch MFW2500W Manual

17
Zoom out
Zoom in
Previous page
1/169
Next page
17
en
Operating the appliance
Put the completely assembled fruit
press attachment, inclined slightly to the
right, on the drive.
Turn fruit press attachment upwards
until it engages.
Tighten threaded ring on the fruit press
attachment.
Attach filling tray.
Place suitable container under the juice
outlet opening.
Place bowl or plate under the opening of
the pulp nozzle.
Insert the mains plug.
Place the food to be processed in the
filling tray.
Switch appliance on with the On/Off
button.
Press food down using the pusher. Do
not exert too much pressure! Filter insert
may be damaged.
Application instructions:
First loosen the pulp nozzle until the
pulp (solid constituents) is still moist
when it flows out.
Then slowly close the pulp nozzle until
juice and pulp come out in the required
form.
After using the appliance:
Switch appliance off with the On/Off
button.
Remove mains plug.
Pull out the pusher.
Remove filling tray.
Remove the fruit press attachment.
Holding down the release button, turn
the attachment to the right and remove.
Disassemble fruit press attachment.
Disassembly is in reverse order.
Clean all parts, see “Cleaning and
servicing”.
Shredding attachment
(some models)
For shredding and slicing cheese, fruit,
vegetables, nuts, almonds, dried bread rolls
and pieces of bread, chocolate and other
hard foods.
W Risk of injury
– Before fitting/removing attachment, wait
until the drive has come to a standstill
and pull out the mains plug.
– Do not grip the sharp blades and edges
of the shredding and slicing inserts.
– Do not reach into the feed tube. Always
use the stuffer to push food down the
hole.
X Fig. H
Place required insert in the housing of
the shredding attachment. The insert is
automatically locked when the appliance
is switched on.
Put the shredding attachment, inclined
slightly to the right, on the drive.
Turn shredding attachment upwards
until it engages.
Place a bowl or plate under the outlet
opening.
Insert the mains plug.
Place the food to be processed in the
feed tube.
Insert pusher and hold in place.
Note:
Pusher can be inserted in one direction
only. Note position of the curve!
Switch appliance on with the On/Off
button.
Press food down using the pusher.
Do not exert too much pressure!
After using the appliance:
Switch appliance off with the On/Off
button.
Remove mains plug.
Pull out the pusher.
Remove the shredding attachment.
Holding down the release button, turn
the attachment to the right and remove.
Disassemble shredding attachment.
Clean all parts, see “Cleaning and
servicing”.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch MFW2500W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MFW2500W in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info